Placing Of Ceramic Log Set - Bellfires View Bell Medium 3 CF Installation Manual

PLACING OF CERAMIC LOG SET

The appliance is supplied with a ceramic log set, embers and vermiculite granules.
IMPORTANT:
• Carefully place the chips of wood/embers/vermiculite granules and log set,
on and around the main burner according to the directions in this chapter.
• Do not place any chips of wood/embers/vermiculite granules or log set
against the pilot light burner. For that reason, the main burner has a
protective pilot-light protector. Never remove this protector! Make sure
that the pilot fl ame can burn at all times freely over the main burner. Only
in this way is proper ignition of the main burner ensured. Ignoring these
directions could lead to a dangerous situation.
• Make sure that all burner orifi ces remains free at all times!
• The burner bed (with chips of wood/embers/vermiculite granules) and the
positioning of the logs must not be changed.
• Only use those items supplied! These been rigorously checked and the
quantities adapted to the appliance.
• Replacement parts, including the ceramic mat are available from your
dealer.
• Fitting may only be carried out by a qualifi ed person.
Remove the glass according to the instructions in Chapter: DISMANTLING /
ASSEMBLING OF THE GLASS.
This section only applies for appliances delivered with a ceramic log set.
WARNING:
Burner orifi ces, which are not open, could lead to a dangerous situation.
Ceramic log set + embers + vermiculite granules
1. Place the ceramic mat on the burner in such a way that the holes in the mat are
in line with the burner openings. (Note: The ceramic mat is already placed on
the burner when delivered from the factory.)
2. Remove the embers carefully from their packaging and spread them evenly
over the burner mat and the grate around the burner. DO NOT COVER BURNER
OPENINGS !
3. Remove the black vermiculite granules from their packaging and distribute the
vermiculite granules (50 gram) evenly over the burner. DO NOT COVER
BURNER OPENINGS !
Bellfi res
Make sure that all burner openings remain free !!
50 Installation instructions