Dedicated Micros digital sprite 2 Setup Manual page 9

485 BUS 2x MMJ ports for DM 485-BUS accessories.
Alarms and relays
Screw terminal, alarm relay dry contact, NO/NC, configurable for
R1
alarm.
Screw terminal, activity relay dry contact, NO/NC, configurable for
R2
VMD.
DIRECT Screw terminal, direct auxiliary input, NO/NC.
AUX ALARMS 25-way (Female) D-type programmable alarms, NO/NC.
9-way (Female) D-type, configurable for global camera fail and
AUX RELAYS
trigger on alarm.
Digital Sprite Front Panel
The following details the keys and LEDs on the front panel of the
Digital Sprite 2.
1 2 3
EVENT COPY
9 10 11
GOTO
POWER / IR INDICATOR
Note: The diagram shows a 16 channel unit.
Camera Control
Camera keys for camera selection.
1 - 16 Note: The number of camera keys will depend on the number of
video inputs supported on the product.
Monitor Control
Initiate a sequence on Main (MON A) or Spot (MON B) Monitor.
Show a Picture in Picture display on the Main (MON A) monitor.
4 5 6 7 8
MODE MENU
12 13 14 15 16
LIVE PLAY SPOT RECORD
Show a four way split screen display on the Main (MON A) monitor.
Show a multiscreen display on the Main (MON A) monitor.
VCR Keys
Pause the image in Live and Playback mode.
Rewind / Search images in Playback mode.
Playback recorded images and GOTO.
Fast forward / Search images in Playback mode.
Additional Keys
EVENT Access Event Log and Event Search Filter menu.
COPY
Access Copy Images menu.
MODE Select between Live and Playback mode.
MENU
Enter User or Installer menus.
LEDs
LIVE Unit is in Live mode when lit.
PLAY
Unit is in Playback mode when lit.
SPOT Spot (MON B) monitor is being controlled.
RECORD Unit is recording video to the internal hard disk.
Infra-Red control is enabled when green. The Infra-Red control is
POWER
disabled when the LED is Amber.
7