Schedule - Dedicated Micros digital sprite 2 Setup Manual

Schedule

A schedule can be used to record selected cameras at different times, change
the record rates and determine whether alarms or activity is enabled.
Schedule
Schedule Type Timed
Night On
Weekend Off
Keyswitch None
Schedule Type
This determines how the schedule will operate, the options available are:
• Timed (default) - allows settings to be configured for set times during the
day, night and weekend.
• Zone Control - This enables or disables Night Zone or Weekend Zone
settings.
Note: Enabling Zone Control will override any timed Schedule setting and will
switch into Night or Weekend mode when an alarm is activated. Refer to Zone
Configuration for more information.
Night
The Night option allows times to be configured to determine when the night
settings would be applied.
The options are:
• On - Night settings would be permanently applied.
• 7 Day Timer - This activates a sub menu where Day and Night times can
be allocated, refer to the 7 Day Timer section.
• On between - this allows the start and end times to be set when the Night
settings will be applied.
• Off - When the night option is off the Day settings will be applied at all
times by default.
Zone Control, Timed
On Between, 7 Day Timer, Off, On
On Between, Off
Direct, Aux, Module 1 - Module 16, None
7 Day Timer
This sub-menu allows a schedule to be independently set for each day of the
week.
7 Day Timer
Monday Timed
Tuesday Timed
Wednesday Timed
Thursday Timed
Friday 24Hr Day
Saturday 24Hr Night
Sunday 24Hr Day
24 Hr Day
This enables the unit to record using the Day settings at all times.
24 Hr Night
This enables the unit to record using the Night settings at all times.
Timed
The schedule will enable the Day settings during a set period and then switch
automatically to the Night settings at a programmed time. The diagram shows
that the unit will be active with the Day settings from 09:00 on Monday until it
switches to the Night settings at 18:00. This is repeated each day until Friday
when the settings will be switched to Day then over to Night settings on
Saturday and back to Day on Sunday.
Weekend
The weekend option allows times to be configured to determine when the
weekend settings would be applied.
The options are:
• On between - this allows the start and end times to be set when the
weekend settings will be applied.
• Off - When the weekend option is off the weekend setting will never apply.
Day Night
09:00 18:00
09:00 18:00
09:00 18:00
09:00 18:00
19