Dedicated Micros digital sprite 2 Setup Manual page 45

• Overwrite - By default, the Digital Sprite 2 will overwrite the recorded
images on the hard disk. A warning will also be displayed to inform the
Operator that the disk is full.
• Stop Recording - The Digital Sprite 2 will stop recording. A warning will also
be displayed.
Write Once Last Reset
This displays the time and date the Write Once process was last reset.
Schedule Rates
This option is enabled by default. With 'Schedule Rates' enabled, the Digital
Sprite 2 provides the option to configure record rates for day, night and
weekend operating mode in the 'Standard Record Schedule' and 'Variable
Record Schedule' menu. Disabling this option will switch the scheduled
recording options to a single set of rates to be used in all schedule (day, night,
weekend) operation modes.
Record Text in Images
It is possible to enable or disable the 'Text In Image' function.
Event Database Configuration
The Digital Sprite 2 supports a database that stores events on the unit. This
allows the user to configure the size of this database.
Event Database Configuration
Last reset time
Current number of entries
Maximum number of entries
Last Reset Time
This read only setting is generated by the Digital Sprite 2 and shows the date
and time of the last database reset (i.e. when the maximum entry database is
changed, the database is reset).
Current Number of Entries
This read only setting identifies the existing number of entries within the event
database.
Maximum Number of Entries
This sets the maximum entries within the event database. Changing this will
reset the event database and clear all previously stored events.
24/Nov/2004 15:43:01
0006
1000 0000 - 9999
43