Display Options - Dedicated Micros digital sprite 2 Setup Manual

The Digital Sprite 2 places a 'marker' in the regular recording that acts as the
start of the pre-alarm recording. The number of images available will be
dependant on the pre-alarm time set.
Note: If recording is not enabled, there may not be any images on the disk. If
pre-alarm recording is required, ensure recording is enabled.
Alarm Duration
This is the minimum time period in seconds from the start of the VMD trigger
that will be protected from being overwritten. This time will include the VMD
recording, the pulse extension and any post alarm recording (if applicable).
This does not include the pre-alarm images.
Relays
The relays on the Digital Sprite 2 can be configured to automatically trigger
under certain conditions.
Cell Display
It is possible to enable or disable VMD Cell Display on the main monitor
(Mon A) output of the Digital Sprite 2. This helps highlight areas of motion on
the monitor, when reviewing VMD events.
VMD Buzzer
The on-board buzzer can be enabled to automatically activate when VMD is
detected on any of the video inputs.
34 34

Display Options

Display Options
P in P position
Quad sequence
Main monitor text
Spot monitor text
Text background
Sequence dwell
Multiscreen interlace
Multiscreen titles
Display unit number
Base camera number
Picture in Picture Position
This determines where the PinP will appear on initial selection of feature. The
options are top left or right and bottom left or right.
Quad Sequence
It is possible to decide the sequence format of the Quad display:
• A whole page (all segments) can sequence 1, 2, 3, 4 then 5, 6, 7, 8.
• A single segment at the bottom right of the screen, e.g. 1, 2, 3, 4 then 1, 2,
3, 5.
Main Monitor Text
It is possible to select the text that will be displayed on the main monitor. The
options are:
• None - switch all monitor text off (when used in conjunction with display
unit number).
• Clock only - display the time, date and mode of operation (Day,
Night, Weekend and Spot).
• Title only - display the camera number, the unit number, camera
title and the mode of operation.
• Both - display both the clock and title information.
Top left, Top right,
Top left
Bottom left, Bottom right
Segment
Segment, Page
Both Both, None, Clock only, Title only
Both, None, Clock only, Title only
Both
On On, Off
05 secs. 01 - 99 secs.
On
On, Off
On
On, Off
On
On, Off
001 000 - 999