Camera Viewing - Dedicated Micros digital sprite 2 Setup Manual

System Shutdown
The Digital Sprite 2 can be shutdown from this menu.
Some menu changes would require the unit to be reset, for example changes
within the System Features menu.
To reset the Digital Sprite:
1. Use the key to highlight the 'System Shutdown' option.
2. Select Enable, a prompt will be displayed.
3. Press and hold the Camera 1 key for 5 seconds. The unit will shutdown,
where a prompt will appear to say you can switch the unit off.
To abort the reset, press the Menu or Mode key.
Note: Shutting down your Digital Sprite 2 by any other method will put the
integrity of your DVR at risk. If your Digital Sprite 2 is shut down in any
uncontrolled manor (power off at mains or removing the power lead) more than
5 times in one hour, it will go into Engineering Bootloader mode for
approximately fifteen minutes and then will reboot in normal mode.
Tip: You can restart the unit from the 'Systsem Shutdown' option by pressing
and holding Camera 4.
Timezone
There are numerous time zones supported on the Digital Sprite 2, select the
zone for where the unit is installed so the time and date will reflect the local
time and will change in conjunction with Daylight Saving Time.
18 18 18 18

Camera Viewing

Camera Viewing
View
It is possible to define the cameras that can be viewed on the main or spot
monitor, the options are all cameras or selected cameras. All the cameras can
be viewed by default.
Note: Cameras that are selected within this menu for viewing will not affect the
cameras that are selected to record.
Cameras removed from the view option are not displayed on the main or spot
monitor in live or playback mode and multiscreen display will show a blank
segment where the camera should be.
To change the cameras to be viewed
Press the button to change the edit field to 'Selected cameras'.
A menu will display the cameras to be viewed.
Press a camera key to toggle the camera in or the viewing option. A filled box
denotes cameras that can be viewed.
Selected Cameras 1
9 10 11 12 13 14 15 16
Tip: It is advisable to set a password to stop this setting being altered by
unauthorised personnel.
All cameras All cameras, Selected cameras
2 3 4 5 6 7 8