System Logs - Dedicated Micros digital sprite 2 Setup Manual

The supported PTZ / Dome camera protocols are:
Option Manufacturer
BBV 485 BBV
Dennard Dedicated Micros 2050, 2055
Ernitec Ernitec
JVC JVC
Kalatel Airtech/Kalatel
Mark Mercer Mark Mercer
Panasonic WV
Panasonic
CS600
Panasonic WV
Panasonic
CS850
Pelco-P Pelco
Philips Bosch / Philips
Samsung Samsung
Sensormatic Sensormatic
Ultrak Ultrak
Vantage Vantage
VCL VCL/Ademco
Vista PD Vista
Model
All models
Orion Series
TK-C675, TK-676, TKC-C553E
CyberdomeTM
Quick Switch, Meridian
WV CS600
WV-CS850A, WV-C854, WV-
CW860
Spectra II, Spectra III (twisted pair
only)
G3 series (RS232)
SOC-641
Speeddome IV, V, VI (RS422) &
VII (RS422)
UltradomeTM Kd6
Juno Dome
Orbiter MicrospheresTM /
RapidDomeTM
Power Dome

System Logs

There are a number of system logs supported on the Digital Sprite 2, these
logs can be viewed and used for Administration purpose.
System Logs
PPP connections
Anonymous FTP connections
Illegal file access
Telnet / FTP users
Archive
Logfile
Email log
Sent message log
Each log requires enabling to ensure entries are created by the Digital Sprite 2,
refer to the Networking Guide for details on how to enable and view the
system logs.
Note: If a log is not enabled, the option to view this log will not be displayed
within this menu.
Status Page
It is possible to switch the status page off on the Digital Sprite 2.
The status page will detail any alarms on the system, camera failure, main
storage (protected) and the earliest unprotected recording.
Disabled, Enabled View
Disabled
Disabled, Enabled View
Disabled
Disabled, Enabled View
Disabled
Disabled, Enabled View
Disabled
View
View
View
View
39