Operation Mode - Standard Mode; Operation Mode - Position Mode; Operation Mode - Horizontal Mode - iPEK VISIONCONTROL VC200 User Manual

Device Control
Operation Mode – Standard Mode
The camera head follows the standard control functions through the joystick. In this regard please read the operating manual of the connected
device.
Operation Mode – Position Mode
In Position Mode the camera head moves synchronously with the joystick.
• Move the joystick in the desired viewing direction:
- Move the joystick forward or back: The camera pans downward or upward.
- Move joystick to the left or to the right: Camera rotates to the left 179° or the right 179° along the longitudinal axis of the
camera head.
- The spring-loaded return of the joystick to the center position moves the camera into home position.
Operation Mode – Horizontal Mode
In Horizontal Mode rotation is deactivated and the camera can only be panned. Automatic horizontal alignment is always active in this process.
• Move the joystick forward or back: The camera pans downward or upward.
NOTE!
For more information always read the operating instructions of the connected device.
Executing the inspection
83