iPEK VISIONCONTROL VC200 User Manual page 2

Symbols used
The following symbols are used in this user manual:
CAUTION!
This safety warning describes dangerous situations in which fatal injuries or severe injuries can occur.
ATTENTION!
This safety warning describes dangerous situations in which material damage to the inspection system or to other objects
can occur.
NOTE!
This symbol identifies instructions that are important for economical use of the system and that facilitate its use.
NOTE!
The owner of the system is responsible for proper disposal! See the note on device take-back at the end of service life.
MAINTENANCE!
This symbol indicates instructions that explain how to properly clean and care for the system to prevent defects and major
repairs. The service life of your system can be significantly extended through proper maintenance.
FACILITATED WORKSTEP!
If you perform this work step you can execute the described function faster.
About this user manual
On the following pages you will read how to place the VISIONCONTROL control panel in service for your work environment,
and how to operate it properly with the aid of the VISIONREPORT software. iPEK took particular care during the development
process to ensure that you can operate the system safely, properly, and economically. To do this it is necessary that you read this
user manual carefully before using the inspection system. Follow all instructions with exactness so that you do not place yourself and
other persons in jeopardy, and so that you avoid damage to the system! If you have questions on handling the VISIONCONTROL
control panel that are not answered in this user manual, please contact our service personnel.
iPEK International GmbH
See, Gewerbepark 22
D-87477 Sulzberg
Phone: +49 8376 921 800
Fax: +49 8376 921 80 21
Mail: isg_info@idexcorp.com
iPEK SPEZIAL TV GmbH
Dürenbodenstraße 7
A-6992 Hirschegg
Phone: +43 5517 3125
Fax: +43 5517 3126
Mail: isg_info@idexcorp.com