Start Recording - iPEK VISIONCONTROL VC200 User Manual

Start Recording

Executing the inspection
Start Recording
The action button Start Recording starts the recording of video data. If you are working in a general project you must first create or select a
section. If you are working in a simple project you can specify the file in which the video will be saved. If you do not specify a file name by yourself,
a default name will be used. If a section or file is not selected then the button cannot be activated. After the recording has started, in the upper
right status display a red icon is displayed that indicates that you are recording. In parallel the label of the button changes to "Pause Recording",
and the inspection text will be overlaid in the video image for the set duration.
40h 10min 0,00m / 743,33m 13:50 Uhr
103