Section Start Texts - iPEK VISIONCONTROL VC200 User Manual

System Settings

Section Start Texts

These texts are only available for standard projects. With these texts, you can specify for
each catalog separately which section properties will be displayed when you start video
recording. By default, only the most commonly used properties are displayed.
- Under "Catalog" you can select the catalog for which you want to change the displayed properties.
Only the catalogs associated with your currently selected locale are shown.
- Under "Property" you can see the differenty properties of a section.
You can switch a property item on or off by pushing the button "On" or "Off" next to each property.
- Under "Line" you can specify the line for a property item to appear.
NOTE!
The number of columns of the touchscreen corresponds to the number of characters that can be displayed horizontally. The "Line"
selection field defines the line from the upper border in which the text overlay appears.
iPEK Spezial TV GmbH
Kopfzeile 1
Duerenbodenstr. 7, D-87568 Hirschegg
Kopfzeile 2
Tel. +4355173125, FAX: +4355173126
Kopfzeile 3
Frei positionierbare Texte
Inspektionstexte
1970-01-01 00:00:01
Dateneinblendungen
1000 mbar 0.00 m 0 g
Dateneinblendungen
e-mail:spezial-TV@ipek.at Internet:www.ipek.at
Fußzeile
User interface
0 g 0 gC
43