Extended Functions And Further Advice - iPEK VISIONCONTROL VC200 User Manual

Functional description

Extended functions and further advice

Joystick Click left:
The camera automatically moves into its home position.
Joystick movements are ignored after a joystick click for one second.
Joystick Click right:
The crawler and the cable reel are stopped.
Cruise control will be deactivated if it was active.
Camera focus:
The camera focus is used to focus the camera image. After system startup, camera heads with an automatic focus feature (RCX90) will always
have it enabled by default. By pressing the focus buttons, such a camera will automatically switch into manual focus mode. You can re-enable the
automatic focus in the device control dialog.
Camera zoom:
The camera zoom is used to change the focal length of the camera. Please note that the sensitivity of the camera joystick depends on the zoom
position. When you have zoomed in very closely, camera movements are executed more slowly in order to offer you more precise control over
the camera movement.
Elevator:
If the elevator is retracted on over 50 % of its maximum height, the view in the video image can be impaired by the crawler. The elevator stops at
50% of the maximum height while it is starting up. This position marks the point up to which a coupling swivel out is possible without the crawler
impairing the view. The elevator can be moved to maximum height by pressing the "Lift" button.
FULL-STOP:
All system movements are stopped after pressing this. The system itself remains active. If cruise control is active, it will be disabled when pressing
full stop. In case you are using a remote control, you can unlock control functions on the VISIONCONTROL by pressing this button. As soon
as you press a button on the remote control, all control functions on the VISIONCONTROL will be locked, as it is not possible to use the
VISIONCONTROL and the remote control at the same time.
22
Control panel VISIONCONTROL - Version VC200