Quick Access / Create A Simple Project - iPEK VISIONCONTROL VC200 User Manual

User interface

Quick Access / Create a simple project

If you are working within a simple project, you can directly start the inspection without any pre-configuration of the inspection. For a simple project
only videos can be recorded, screenshots can be taken and freetexts can be overlaid. Events can only be created if a catalog is assigned to the
simple project. Overlays of sections or logs are not possible.
• Create a simple project by clicking the Quick Access button.
• In the screen dialog enter a name for your project.
• Confirm your input with OK.
After you have created a simple project the view changes directly to the inspection view. You can start your inspection immediately. For information
on recording inspection data such as video data, screenshot data, or event data, read the chapter, "Execution of the inspection", starting on Seite
75.
NOTE!
If you want to enter events in a simple project then you must add a catalog to the project. To do this go to the project settings and
configure your project.
56
Last Project
Name: Test
Customer: iPEK International GmbH
Created: 2011-02-24
Continue Project Quick Access Projects Overview
Quick Access / Create a simple project
Direct Control Settings Switch off