Deleting A Section - iPEK VISIONCONTROL VC200 User Manual

Sections

Deleting a section

In order to delete a section you first have to go to the Section overview dialog. Go to this dialog by selecting the section button in the lower
function button bar. This button is only displayed if you have not selected a section. If you create a general project, the Section overview dialog
will be displayed directly after confirming the project settings.
• Select the section that you want to delete.
• Select the Delete section button.
• Confirm with the Yes button.
ATTENTION!
If you delete a section, then all the inspection data assigned to this section, as well as video recordings and image data, will be
irrevocably lost.
User interface
65