Table of Contents
Advertisement
5.7
REMOVAL AND RE-FITTING THE FASCIA
To remove the fascia assembly from the fire, open the controls access door.
Located at the bottom left and right hand sides of the fireox base are two fascia
retaining screws. Remove these screws and left the fascia clear of the firebox.
See Fig. 17 below
Fig. 17
5.8
USER REPLACEABLE PARTS
The only user replaceable parts on this fire are the fuelbed components and
coals which may be replaced as described in section 5.3 / 5.4
Replacement of any other parts must be carried out by a competent person such
as a CORGI registered gas installer. The part numbers of the user replaceable
parts are as follows, these are available from BFM Europe Ltd. who may be
contacted at the number on the rear cover of this book.
Complete coal ceramic set
Coal fuelbed base
Coal fuelbed front rails (pair)
Replacement coal set
Complete pebble / ceramic set
Pebble Fuelbed base
Pebble Fuelbed front rail (L/H)
Pebble Fuelbed front rail (R/H)
Replacement pebble set
Controls Access
Door in Open
Position
Fascia securing
screws
B-96430
B-96400
B-96410
B-96420
B-107340
B-107350
B-107360
B-107370
B-107380
53
Advertisement
Table of Contents
