Removal & Re-Fitting The Trim / Fret / Fascia; User Replaceable Parts - Flavel Kenilworth HE Installation, Maintenance & User Instructions

To clean the glass panel, please remove it from the product as described in pages
10-11. Use a clean damp cloth and ceramic glass cleaner to remove any stains or
deposits frm the glass panel. Do not using scouring pads as this may scratch the
surface finish of the glass panel.
PLEASE NOTE :- The glass will require cleaning periodically. Condensation
produced by the products of combustion will create marks on the inside face of the
glass panel.
6.7 REMOVAL AND RE-FITTING THE TRIMS / FRETS
Please refer to page 35 of the Installation section of this manual.
6.8

USER REPLACEABLE PARTS

The only user replaceable parts on this fire are the fuelbed components and
coals / pebbles which may be replaced as described in section 6.3 / 6.4. In order
to replace the fuel-bed components, the glass panel of the appliance will need to
be removed, please refer to pages 11 & 12 of this book for details on how to
remove the glass panel.
Replacement of any other parts must be carried out by a competent person such
as a registered gas installer. The part numbers of the user replaceable parts are
as follows, these are available from BFM Europe Ltd. who may be
contacted at the number on the rear cover of this book.
Diamond / Linear complete pebble / ceramic set
Diamond / Linear pebble fuelbed base
Diamond / Linear pebble fuelbed front rail
Diamond / Linear replacement pebble set
Kenilworth / Diamond complete coal / ceramic set
Kenilworth / Diamond coal fuelbed base
Kenilworth / Diamond coal fuelbed front rail
Kenilworth / Diamond replacement coal set
62
/ FASCIA'S
B-110000
B-108050
B-105060
B-110020
B-121600
B-121550
B-121560
B-121610