Removal & Re-Fitting The Trim / Fret; User Replaceable Parts 2 - Flavel Caress HE Installation, Maintenance & User Instructions

6.6.3 CARESS CONTEMPORARY MODELS - REMOVAL / REPLACEMENT
OF THE FRET
a) The Caress contemporary fret is located via 2 off mounting brackets
(fitted to the fascia during installation) onto the burner heat shield.
See Section 3.6 on page 29 for illustrations.
6.7 USER REPLACEABLE PARTS
The only user replaceable parts on this fire are the fuelbed components and
coals which may be replaced as described in section 6.3. In order to replace the
fuel-bed components, the glass panel of the appliance will need to be removed,
please refer to pages 10 & 11 of this book for details on how to remove the glass
panel.
Replacement of any other parts must be carried out by a competent person such
as a registered gas installer. The part numbers of the user replaceable parts are
as follows, these are available from BFM Europe Ltd. who may be
contacted at the number on the rear cover of this book.
Complete coal / ceramic set
Fuelbed base
Fuelbed front rail
Replacement coal set
B-105190
B-105070
B-126490
B-105180
55