Removal & Re-Fitting The Decadence Fascia; User Replaceable Parts - Flavel Decadence HE Installation, Maintenance & User Instructions

Inset live fuel effect gas fires
Table of Contents

Advertisement

6.12
REMOVAL AND RE-FITTING THE DECADENCE FASCIA
6.12.1
The fascia is fitted to the firebox by hooking the mounting brackets into
the slots on the firebox as indicated in figure 25.
Fig. 25
6.13

USER REPLACEABLE PARTS

The only user replaceable parts on this fire are the glass panel, fuelbed
components and coals / pebbles which may be replaced as described in section
6.9. In order to replace the fuel-bed components, the glass panel of the appliance
will need to be removed, please refer to pages 71 & 72 of this book for details on
how to remove the glass panel.
Replacement of any other parts must be carried out by a competent person such
as a registered gas installer. The part numbers of the user replaceable parts are
as follows, these are available from BFM Europe Ltd. who may be
contacted at the number on the rear cover of this book.
Complete pebble / ceramic set
Pebble fuelbed base
Pebble fuelbed front rail
Replacement pebble set
Complete coal / ceramic set
Coal fuelbed base
Coal fuelbed front rail
Replacement coal set
Glass panel
Location
hooks
on cast trim
73
4 off location
slots in
firebox
B-110000
B-108050
B-105060
B-110020
B-121600
B-121550
B-121560
B-121610
B-125630

Advertisement

Table of Contents
loading

Table of Contents