Removal & Re-Fitting Of The Glass Panel - Flavel Linear HE Installation, Maintenance & User Instructions

6.13 REMOVING AND RE-FITTING THE GLASS PANEL
6.13.1 Remove the top glass retaining cover from the product. It is secured via
the two screws as indicated, see figure 30 below.
Fig. 30
2 off securing
screws
6.13.2 Remove the left and right hand side glass securing brackets from the
product. They are secured via 3 off screws each side. Support the
glass panel to prevent it falling forwards when the side trims are
removed. See figure 31 below.
Fig. 31
3 off securing
screws L/H/S
86
3 off securing
screw R/H/S