Flavel Vesta Installation, Maintenance & User Instructions page 13

For all models proceed as follows :-
a) Remove the firebox / burner assembly from the packaging. Remove the
fuel-bed set from the combustion chamber and store in a safe location.
Fig. 6
Remove Fuel-bed
Set from Firebox
before proceeding
with the installation
b) Remove the firebox mounting plate from the rear face of the firebox
assembly by unscrewing the M5 retaining screws as shown below in
Fig. 7
Fig. 7
Remove Firebox
Mounting Frame by
Unscrewing the 4 off
retaining screws as
indicated
13