Table of Contents
Advertisement
5.3
RE-ASSEMBLING THE CERAMICS AND FUEL BED
(COAL MODELS)
a)
Place the fuel-bed base centrally on to the fuelbed support and pull
fully forwards to the burner. Make sure that the fuelbed base is
located centrally in the fire box. Ensure that the fuelbed base is
not lodged on the burner. See fig. 3 below.
Fig. 3
b)
Place the left hand front coal rail moulding onto the front ceramic rail
support and locating pins as shown below in Fig. 4
Fig. 4
Front Ceramic Rail Support
44
Advertisement
Table of Contents
