Xerox Phaser 3200MFP Service Manual page 23

Initial Inspection
1. Check the power.
1. The machine does not power on after a long period.
• Is the Power Switch (machine and wall socket) turned on?
• Is the Power Cord connected to the machine correctly?
• Is the Power cord connected to the wall socket correctly?
• Is the wall socket working?
• Is the unit rated the same voltage as the supply?
2. Does the Fan work when power is turned on?
• Check the connectors on the SMPS.
• Check the fuses on the SMPS.
2. Check the Installation Environment.
1. Ensure the installation surface is flat, level and free from vibration.
Move the machine if necessary.
2. Ensure that the temperature and humidity of the surroundings are within specification
If necessary move the machine.
3. Ensure that the machine is positioned away from any air conditioning or other heating or cool-
ing equipment. Ensure that the machine is not positioned in a direct draft from any air condi-
tioning, fan or open window.
Move the machine if necessary.
4. Ensure the machine is not positioned in direct sunlight.
If it is unavoidable, use a curtain to shade the machine.
5. Ensure the machine is installed in a clean and dust free environment.
Move the machine if necessary.
6. Certain industrial or cleaning processes which emit fumes can damage the machine.
Move the machine if necessary
3. Check paper type.
1. Use only paper which is of a suitable quality, weight and size.
Check the user guide.
4. Check the overall condition of the machine
1. Clean the Paper Transport areas.
Any rollers with dirt surfaces should be cleaned or replaced.
Phaser 3200MFP / Workcentre PE220 04/07
Status Indicator RAPs
2-5