IQ 5 Light Image
Description
The printed image is light, with no ghost.
Phaser 3200MFP / Workcentre PE220
Check and Cause
1. Ambient temperature is below
than 10°C.
2. Check shading profile.
3. Bad contact caused by the toner
contamination between the high
voltage terminal in the HVPS and
the one in the set.
4. Develop roller is contaminated
when the toner cartridge is almost
consumed.
5. Abnormal output from the HVPS
can be caused by contamination
04/07
Image Quality
Solution
1. Wait 30 minutes after printer is
powered on before you start print-
ing.
2. Redo shading profile in the Tech
mode,
GP
4.
3. Clean the contaminated area.
4. Install a new toner cartridge:
-
PL 1.0
(Workcentre PE220)
-
PL 1.1
(Phaser 3200).
5. Check and install a new HVPS If
necessary:
-
PL 1.0
(Workcentre PE220)
-
PL 1.1
(Phaser 3200).
3-7