Print Cartridge Problems Rap - Xerox Phaser 3200MFP Service Manual

20 Print Cartridge Problems RAP

This section explains messages on the LCD that are related to the data stored in the EEPROM in
the print cartridge.
Toner Low
- Explanation: The amount of toner remaining is less than 10%. The print cartridge is almost
empty or at end of life.
- Solution: Replace the toner cartridge.
• PL 1.0 - Workcentre PE220
• PL 1.1 - Phaser 3200
Toner Empty
- Explanation: The print cartridge is empty
- Solution: Replace the toner cartridge.
• PL 1.0 - Workcentre PE220
• PL 1.1 - Phaser 3200
Drum Warning
- Explanation: This message appears when the OPC drum is nearing the end of its life
(14,000 pages). This means that the life of the mechanical parts in the print cartridge has
expired (this is not an indication of toner remaining).
- Solution: After printing about 15,000 pages, in a worst case scenario, the waste toner collec-
tor might overflow and it may cause the system to fail. Also after 15,000 pages the OPC drum
surface will be becoming worn and print quality will degrade, print images will become misty.
It is therefore necessary to replace the print cartridge even though there may be toner left in
it. When this message occurs there are approximately 1,000 pages left.
Replace Drum
- Explanation: The print cartridge mechanical life is expired.
- Solution: Replace the toner cartridge.
• PL 1.0 - Workcentre PE220
• PL 1.1 - Phaser 3200
Phaser 3200MFP / Workcentre PE220 04/07
Status Indicator RAPs
2-33