How To Use This Manual - Xerox Phaser 3200MFP Service Manual

Introduction
Introduction

How To Use This Manual

Differentiating Between Machine Variants
The Phaser 3200MFP/B and 3200MFP/N will be identified in this manual by the identifier Phaser
3200.
The Workcentre PE220 will be identified in this manual by the identifier Workcentre PE220.
When a procedure, parts list description or other reference is common to both the Phaser 3200
and Workcentre PE220, no identifier will be given. Artwork used in these procedures will show
either the Phaser 3200 or Workcentre PE220, not both.
When a procedure, parts list description or other reference is unique to either Phaser 3200 or
Workcentre PE220, the appropriate identifier will be quoted and any artwork will also be specific.
Precautions
In order to prevent accidents and to prevent damage to the equipment, please read the precau-
tions listed below carefully before servicing the machine and follow them closely.
Safety Warning
1. Only to be serviced by appropriately qualified service engineers.
High voltage and lasers inside the product are dangerous. This machine should only be serviced
by a suitably trained and qualified service engineer.
2. Use only Xerox replacement parts
There are no user serviceable parts inside the machine. Do not make any unauthorized changes
or additions to the machine. This could cause the machine to malfunction and create an electric
shock or fire hazards.
3. Laser Safety Statement
The machine is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1
Subchapter J for Class 1(1) laser products, and elsewhere, it is certified as a Class I laser product
conforming to the requirements of IEC 825. Class I laser products are not considered to be haz-
ardous. The laser system in the machine is designed to never have any human access to laser
radiation above a Class I level during normal operation, user maintenance, or prescribed service
condition.
Phaser 3200MFP / Workcentre PE220 04/07 iii