Control Panel Functions; Gp 5 Control Panel - Xerox Phaser 3200MFP Service Manual

General Procedures and Information

GP 5 Control Panel

Control Panel Functions

Note: The Workcentre PE220 is shown in Figure 1 but the functions are identical for the
Workcentre PE220 and Phaser 3200.
Adjusts the brightness of the documents for the current copy job.
Lighten/Darken
Selects the document type for the current copy job.
Original Type
Makes a copy smaller or larger than the original.
Reduce/Enlarge
Allows you to use one of the special copy features, such as Clone, Collation, Auto fit, 2 Sides
Favourite Copy
on 1 page, 2/4 Up (multiple pages on a sheet), and Poster copying after assigning it.
Displays the current status and prompts during an operation.
Used to scroll through tthe available options for the selected menu item.
Confirms the selection on the display.
Enter
Enters Menu mode and scrolls through the menus available.
Menu
Sends you back to the upper menu level.
Exit
Starts a job.
Start
Stops an operation at any time.
Stop/Clear
In Standby mode, clears/cancels the copy options,
such as the darkness, the document type setting,
the copy size and the number of copies.
Dials a number or enters alphanumeric characters.
Number Keypad
Adjusts the resolution of the documents for the current fax job.
Resolution
Allows you to send a fax to multiple destinations.
Broadcasting
Allows you to store frequently dialled fax numbers as one or two-digit speed dial or group dial
Phone Book
numbers for automatic dialling and edit the stored numbers. Also allows you to print a Phone-
book list.
In Standby mode, redials the last number or in Edit mode, inserts a pause into a fax number.
Redial/Pause
Engages the telephone line.
Manual Dial
Selects the scan feature software (Printer Settings Utility) provided.
Scan
Allows you to save on toner by using less toner to print a document.
Toner Save
Selects the copy feature.
Copy
Selects the Fax feature.
Fax
6-46
Figure 1
04/07 Phaser 3200MFP / Workcentre PE220