Jam 2 Rap - Xerox Phaser 3200MFP Service Manual

4 JAM 2 RAP

Description
Paper is jammed inside the fuser.
Paper is jammed in the discharge roller and in the fuser just after passing through the Actuator-
Feed.
Check and Cause
1. If the paper is completely fed out of the
machine, but Jam 2 occurs, the exit sensor
actuator may be defective.
2. Concertina jam occurs in the fuser.
Phaser 3200MFP / Workcentre PE220
1. Check the exit sensor actuator:
- PL 7.0 (Workcentre PE220)
- PL 1.4 (Phaser 3200).
2. Remove any paper jammed in the fuser:
- PL 7.0 (Workcentre PE220)
- PL 7.1 (Phaser 3200)
Clean and check the parts as necessary:
• Pressure roller
- PL 7.0 (Workcentre PE220)
- PL 7.1 (Phaser 3200)
• Main Frame Assembly
- PL 8.0 (Workcentre PE220)
- PL 8.1 (Phaser 3200)
04/07
Status Indicator RAPs
Solution
2-9