Xerox Phaser 3200MFP Service Manual page 205

Phaser 3200 Engine Test Mode
1st
2nd level
level
Engine Diagnostic
Test
Engine Pat-
tern
Status Print
Phaser 3200MFP / Workcentre PE220
Table 2: Phaser 3200 Engine Test Mode
3rd level
MTR Fan Sol ETC
LSU
Sensor
Heat Test
HVPS Test
Stripe Pattern
White Pattern
Engine Print
4th level
Motor Test
Pick Up Test
Main Fan Test
SMPS Fan Test
LSU ErrorTest
LD Test
Feed Sensor Test
Exit Sensor Test
Cover Sensor Test
Empty Sensor Test
Therm ADC 170
Therm ADC 160
Therm ADC 150
Therm ADC 140
Therm ADC 130
Therm ADC 125
Therm ADC 120
Therm ADC 115
Therm ADC 110
MHV Test (1300V)
Bias Test (350V)
THV Test (1300V)
THV (-)
1: On, 2: Off
1: On, 2: Off
04/07
General Procedures and Information
5th level
1 : On, 2 : Off – next test selected
1 : On, 2 : Off – next test selected
1 : On, 2 : Off – next test selected
1 : On, 2 : Off – next test selected
1 : On, 2 : Off – next test selected
1 : On, 2 : Off – next test selected
1. Check : read the sensor
2. Next : Next Sensor test
1. Check : read the sensor
2. Next : Next Sensor test
1. Check : read the sensor
2. Next : Next Sensor test
1. Check : read the sensor
2. Next : Next Sensor test
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off (maintain the fusing temp.)
1 : On, 2 : Off
1 : On, 2 : Off
1 : On, 2 : Off
1 : On, 2 : Off
6-49