Utility Commands; Off-Line Set (Ofln) - Panasonic KX-TVP100E Installation Manual And Instructions For Use

7.1

Utility Commands

In the Utility Command mode, the System Administrator can access the functions
described below by entering the appropriate command at the "$" prompt followed
by [RETURN].
System Administration Top Menu → 3
Utility Command (Type 'HELP' for command list.)
$
OFLN ..... Sets the system to off-line mode
ONLN .... Sets the system to on-line mode
PASS ...... Sets the System Administrator's password
TIME ..... Sets the system clock, date and time
PSET ...... Specifies the reports printing time
ELOG..... Displays device error log
SAVE ..... Stores a backup of the program or data on the hard disk
LOAD .... Restores a backup of the program or data to the system
GPRN..... Displays all of the VPS parameters
VERS ..... Displays the version of hard disk, main ROM and Port card
CREP
CCLR ..... Clears a Custom service menu access count
MWL...... Specifies the number of times the VPS attempts to turn on the
MRL ....... Sets the minimum recording length of a message
MPLT..... Displays the user prompt recording status
HELP ..... Displays brief instructions and a list of Utility Commands
QSET ..... Sets up your VPS roughly so that you can use it quickly

7.1.1 Off-line Set (OFLN)

Used to turn off the call progressing mode of the VPS.
Set the VPS to off-line mode before deleting a mailbox, since this operation in-
volves the updating of a large number of related parameters.
Type "OFLN", then press [RETURN].
If no VPS ports are in use, the VPS will suspend the call progressing service
immediately.
$ OFLN
** OFF LINE MODE **
or
7-2
Maintenance
Displays the keypad assignments, message recording status and the
tree-structure of a Custom service
message waiting lamp on the extensions