Intercom Paging (D-Pits Only) - Panasonic KX-TVP100E Installation Manual And Instructions For Use

I
* The prompts in parentheses (
* Callers will not hear this prompt if there is only one option available.
Note: The above prompt can be recorded in other languages. Refer to "Recording
User Prompts" in Chapter 6.
More
Information • Hold
In case the line is busy, the caller may hold a call before entering this
service. Then the VPS will call the extension again later on.
Conditions • This feature is available to Subscribers only.
• If the specified extension is not a Subscriber, callers will always hear the
following three options.
a) Leaving a message
b) Returning to the Automated Attendant top menu
c) Calling operators
• If none of the options is activated, the call will be disconnected.
Subscriber • Setting up a Covering Extension (Subscriber's Guide page 5-3)
• Setting the Incomplete Call Handling Status (Subscriber's Guide page 5-4)
I
ntercom Paging (D-PITS Only)
Feature Ref. Call Transfer Status
Incomplete Call Handling Service
Description Callers can page Subscribers through built-in speakers and external paging
equipments.
Conditions • This feature is available only when the D-PITS Integration with a Panasonic
KX-TD series telephone system is activated.
• The VPS must be integrated with your PBX in the specified mode.
• Speakers used for paging are determined by System Programming.
S.A. • "Intercom Paging Group" (page 4-30)
• Intercom Paging Parameter (page 4-71)
• "Integration Mode" (page 4-81)
S.M. • "Intercom Paging Group Number" (page 5-9)
Subscriber • Setting the Call Transfer Status (Subscriber's Guide page 5-2)
• Setting the Incomplete Call Handling Status (Subscriber's Guide page 5-4)
3-30 Features
3 Features and Services
) are heard only when that option is activated.