Panasonic KX-TVP100E Installation Manual And Instructions For Use page 159

4.5.4 Service Settings
Value Range
Parameter
(default)
Prompt Mode 1. System
2. User 1
3. User 2
(System)
Menu Repeat 1–3 times
Cycle
Call Transfer Extn./Mbx/
Anytime
(Extn.)
Wait for Second 1–5 sec
Digit
No DTMF Input
Operation
*See Keypad
Assignment
on the next
page for
details.
Specifies the language of a custom service menu
message that the caller to this Custom service will
hear as a guidance.
[Note]
This parameter overrides "Incoming Call Service
Prompt".
Specifies the number of times custom service menu
(3) messages are repeated to the caller.
[Note]
"Custom 1" on the top of the programming screen
(see the previous page) is highlighted, if menu
message for Custom 1 was recorded by the
Message Manager beforehand. This is available in
the VT100 mode only.
Specifies where the call is transferred during the
No custom service top menu.
The "Extn." setting (enter "E") enables the caller
to be transferred directly to his desired party by
dialing the extension number.
The "Mbx" setting (enter "M") enables the caller
to leave messages in the mailbox by entering the
mailbox number of the person to whom caller
wishes to leave messages.
The "No" setting (enter "N") deactivates call
transfer.
Used to resolve the problem that the first digit of
(1) the extension or mailbox number is the same as
one of the custom service menu choices. The VPS
will wait for a second digit for this amount of
time. If this timer expires, the VPS assumes that
the caller wants to choose the menu and not to
transfer a call. This parameter is used only if
"Call Transfer Anytime" is set to "Extn." or
"Mbx".
a–f Specifies how to treat the caller who does not
(c)
respond to the menu message. This occurs when
the caller is using a rotary phone. The factory
setting is "c. Operator", that is, the caller is
automatically connected to the operator
immediately after the playback of menu message
has finished.
Description/Function
System Administrator
Reference
Multi-
Lingual
Service
p.3-42
Incoming
Call Service
Prompt
p.4-38
Recording
Custom
Service
Menu
Messages
p.6-14
Port service
setting
p.4-12
Rotary
Telephone
Service
p.3-52
4-51