Panasonic KX-TVP100E Installation Manual And Instructions For Use page 155

4.5.4 Service Settings
Value Range
Parameter
(default)
No-answer 1. Caller
Coverage Mode Select
2. Leave
Message
3. Disconnect
Message
(Caller Select)
Notes:
Operator 1 – Night Mode
Operator 2 – Night Mode
Operator 3 – Night Mode
Specifies how to treat calls when Operator 3 does
not answer it within the time length defined by
"Operator No-answer Time".
1. Caller Select
The VPS offers the following two options to
the caller.
(a) Leave a message
(b) Call another extension
2. Leave Message
The VPS prompts the caller to leave a message
in Operator 3's mailbox.
3. Disconnect Message
The VPS disconnects the call after playing
"Thank you for calling".
• An Operator-seeking call is always transferred to Operator 1 first.
It will be transferred to Operator 2 and then Operator 3 depending
on System Programming.
• "Next Operator" cannot be set in "No-answer Coverage Mode" of
Operator 3.
Same as Operator 1 – Day Mode
Same as Operator 2 – Day Mode
Same as Operator 3 – Day Mode
Description/Function
System Administrator
Reference
No Answer
Coverage
Mode
p.3-46
Operator
No-answer
Time
p.4-43
4-47