System Administrator's Function - Panasonic KX-TVP100E Installation Manual And Instructions For Use

4.1

System Administrator's Function

As System Administrator of the VPS, you primarily take care of the operational
characteristics of the entire system. You can set up system parameters, administrate
the parameters, or diagnose the system using an interactive screen-based program.
System administration can be done by selecting one of the following options from
the System Administration Top Menu screen below.
System Administration Top Menu
System Administration Top Menu
Notes:
1.
Program
If you need to program the system parameters, see Programming the System
Parameters in this Chapter.
2.
System Reports
If you need to monitor the VPS operation status, see System Reports in Chapter
7.
3.
Utility Command
If you need to turn on/off the call progressing mode of the VPS, or to make a
backup copy of system data, see Utility Commands in Chapter 7.
4-2
System Administrator
1. Program
2. System Reports
3. Utility Command
4. System Reset / Clear
5. Quick Setup
SELECT ITEM AND PRESS RETURN–KEY
• "5. Quick Setup" in the above screen does not appear in the ASCII
TERMINAL mode.
• You may exit and return to the previous screen by pressing [ ].
• In this Chapter 4, if you want to clear the programming value of any
parameter, press the Back Space key. (Some settings cannot be
cleared as pertaining to the specification.)