Table of Contents
Advertisement
2.2
Installation
3
Insert the modular plug of the telephone cord into the modular jack on the Port
card. Let the telephone cord through the ferrite core. Then close the ferrite core.
If you install an optional Port Card (KX-TVP102), let the telephone cord through
the ferrite core also.
Notes: • Make sure the telephone cord is connected to the proper modular jack.
Modular jacks on the Port card correspond to the port numbers as fol-
lows:
You can assign one of the incoming call services according to the port
number.
• When your PBX is a Panasonic KX-TD series telephone system:
To utilize D-PITS Voice Mail Integration, Port 1 of the VPS must be
connected to the lowest number jack assigned as a VPS extension. When
D-PITS Voice Mail Integration is activated, a single extension jack on
the PBX provides two single line interfaces with a Port card on the VPS.
2-12
Installation
SLOT 3
SLOT 2
SLOT 1
To extension port of the PBX
or
CO Line
Port Card
Modular Jack
1
Left
1
Right
2
Left
2
Right
Telephone line
modular jacks
Port 1
Port 2
• Telephone line modular jacks on
the Port card is at TNV.
Port Number
1
2
3
4
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Chapters
Table of Contents
