7.3
Initializing the System
By initializing the system, all messages and mailboxes are cleared and the system
parameters are set to the default setting.
1
Go to System Administration Top Menu.
1 : Program
2 : System Reports
3 : Utility Command
4 : System Reset/Clear
5 : Quick Setup
SELECT ITEM AND PRESS RETURN-KEY
Note:
2
Press [4] for System Initialization.
System Reset/Clear Menu
Mailbox No. Length : 3
System Manager's Mailbox No.
Message Manager's Mailbox No. : 998
Will you change the settings ? (Y/N) : =
3
Press [Y] (this moves the VPS to the off-line mode).
System Reset/Clear Menu
Mailbox No. Length : 3
System Manager's Mailbox No.
Message Manager's Mailbox No. : 998
Reset System Parameters : press "\"
"5: Quick Setup" in the above screen does not appear in the ASCII
TERMINAL mode.
: 999
: 999
7-23
Maintenance