Panasonic KX-TVP100E Installation Manual And Instructions For Use page 45

2.2 Installation
•
Connecting to other PBX:
Please refer to the below illustration.
other PBX
Note: Use a 2-conductor wiring cord. The maximum length of the wire varies
according to your PBX type. Please refer to your PBX Installation
Manual.
•
Connecting to CO Line:
Please refer to the below illustration.
CO Line
Note: Use a 2-conductor wiring cord.
The following models are recommended to be connected to the VPS:
• Panasonic KX-T30810BE-2
• Panasonic KX-T61610BE
• Panasonic KX-T123210BE
• Panasonic KX-TD816E
• Panasonic KX-TD1232E
5
Close the front cover of the VPS (and PBX if the cover is removed).
Reverse the procedure of step 1.
6
Tighten the two screws firmly.
Reverse the procedure of step 1.
2-14
Installation
Terminal wire RJ-11
A 4
B 3
Master socket BT plug
VPS 100
Terminal wire RJ-11
5 4
2 3
VPS 100