Custom Service - Panasonic KX-TVP100E Installation Manual And Instructions For Use

4.5.4 Service Settings

4.5.4.2 Custom Service

Custom service is one of four incoming call services.
By assigning a function to each key, you can provide a customized key-operation
service to callers.
You can set a maximum of 100 custom services.
System Administration Top Menu → 1 → 4 → 2 → Custom Service No. (1–100)
Program – Service Setting – Custom Service Setting – Custom 1
Keypad Assignment
Please choose one of the following functions or services.
Note:
Value Range
Parameter
(default)
Description Up to 32
alphanumeric
characters
(None)
4-50
System Administrator
Description ------------------------------------------------------ : . . . . . . . . . . . . .
Prompt Mode (1: Sys 2: User 1 3: User 2) ------ : System
Menu Repeat Cycle (1-3) ---------------------------------- : 3 times
Call Transfer Anytime (Extn. / Mbx / No) ------------ : Extn.
Wait for Second Digit (1-5 seconds) ------------------ : 1 seconds
No DTMF Input Operation (a-f) -------------------------- : c
1:
4:
7:
: d
a. Transfer to Mailbox
b. Transfer to Extension
c. Operator
d. Exit
e. Previous Menu
f. Custom Service
g. Voice Mail Service
Custom Service Report (CREP)
After programming a Custom service, you can confirm the keypad
assignments, message recording status and the tree-structure of a
Custom service by displaying Custom service report on the terminal.
See page 7-11.
In this report, you can also confirm the number of times a certain
Custom service has been accessed by callers.
The information typed in this field is for your
reference only.
2:
5:
8:
0: c
h. Call Transfer Service
i. Subscriber Service
j. Department Dialing
k. Dial by Name
l. Repeat Menu
m. Main Menu
n. FAX Transfer
Description/Function
: . . . . . . . . . . . . .
3:
6:
9:
#:
Reference
Custom
Service
p.3-13