Table of Contents
Advertisement
7.1
Utility Commands
Changing a Password:
2'
Select [1] or [2].
OLD PASSWORD : =
3'
Enter the current password.
Maximum 8 characters
NEW PASSWORD : =
4'
Enter the new password.
VERIFICATION : =
5'
Enter the password again for verification.
Notes:
7.1.4 Set Time (TIME)
Used to set the correct system date and time to ensure accurate scheduling. A
number of functions require that the system time and date be set correctly in order
to operate properly. These include message waiting notification, external message
delivery, call-retries-after initial-failure-to-connect, and automatic deletion of mes-
sages.
1
Type "TIME", then press [RETURN].
$ TIME
Current time is 12:34, PM
Enter new time (HH:MM, AM/PM) : =
2
Enter the current time.
Current date is AUG-3-1994
Enter new date (MM–DD–YY) : =
7-4
Maintenance
The above is displayed only when changing a password using System
Reset/Clear password.
• The password you entered does not appear on the screen for security
reason.
• Pressing [RETURN] instead of entering a password means the
password has been reset.
• The VPS does not distinguish the capital letter from the small letter.
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Chapters
Table of Contents
