Panasonic KX-TVP100E Installation Manual And Instructions For Use page 115

4.3 Startup System
Note:
Note:
This message is shown on the terminal when D-PITS
communication between the VPS and a Panasonic KX-TD
series telephone system is not made.
In this case, turn off the VPS and start it again after
confirming the line connections and the required
programming.
(In non-D-PITS Integration mode)
** OFF LINE MODE **
>
4
Press [RETURN].
Please Select Your Terminal Type.
1. ASCII TERMINAL
2. VT100
Please Enter the Number :=
5
Press [1] or [2] to specify the RS-232C terminal type.
System Administration Top Menu
1 : Program
2 : System Reports
3 : Utility Command
4 : System Reset/Clear
5 : Quick Setup
SELECT ITEM AND PRESS RETURN-KEY
"5: Quick Setup" in the above screen does not appear in the
ASCII TERMINAL mode.
System Administrator
4-7