3.1.2 Port Mirroring Settings
3.1 Phone User Interface Programming
This section provides information about the features that can be configured directly from the unit, but that are
not mentioned in the Operating Instructions.
To enter direct commands, use the dial keys and soft buttons on the unit.
For details about the other available features, settings and key operations on the phone user interface, refer
to the Operating Instructions on the Panasonic Web site (® see Introduction).
3.1.1 Phone User Interface Feature List and Direct Commands
The following table shows additional features programmable with direct commands. These commands are
hidden from end users.
Direct
Command
[#][1][3][6]
[#][5][3][4]
[#][5][9][0]
3.1.2 Port Mirroring Settings
Port mirroring is used for network monitoring and debugging purposes.
You can enable port mirroring by performing the procedure below from the unit.
To enable port mirroring
1.
On the Home screen, select
2.
Press [#][5][9][0].
3.
Select
Yes
52
Administrator Guide
Resetting the unit
Embedded web
Port Mirroring
.
.
Feature
Ref.
Page 31
Page 26
Page 52
Document Version 2014-04