Message Waiting Notification-Lamp - Panasonic KX-TVP100E Installation Manual And Instructions For Use

3 Features and Services
Conditions • This feature is also available to the Message Manager.
• Class of Service programming determines which Subscriber can use this
feature.
• The Subscriber must contact the System Administrator to check the set
schedule.
S.A. • "Class of Service Number" (page 4-21) / "Number to Dial" (page 4-23)
"Type" (page 4-24) / "Use Device" (page 4-24)
"Number of Retries" (page 4-24) / "Busy Delay" (page 4-24)
"No Answer Delay" (page 4-24) / "Time frame 1, 2" (page 4-24)
• "Authorization of Message Notification" (page 4-33)
"Beeper Callback No. Entry Mode" (page 4-33)
"Device Notification for Unreceived Message" (page 4-33)
• "Outgoing Call Ports" (page 4-67)
S.M. • "Message Notification Status" (page 5-9)
M.M. • Setting Notification by Calling Status (page 6-7)
Subscriber • Setting Notification by Calling (Subscriber's Guide page 5-14)
M
essage Waiting Notification – Lamp
Description The VPS notifies the Subscriber that there are unplayed messages waiting in
the mailbox by illuminating the Message Waiting Lamp on his telephone.
This feature eliminates the need to regularly check the mailbox.
Conditions • This feature is also available to the Message Manager.
• Class of Service programming determines which Subscriber can have this
feature.
• This feature is available only on telephones which has a Message Waiting
Lamp.
• If the mailbox belongs to an Extension Group, the VPS turns on the Message
Waiting Lamp on all the telephones in the group (see Extension Group).
• If D-PITS Voice Mail Integration is not activated, make sure that the
following System Programming items of Panasonic KX-TD series telephone
system are completed for this feature:
[114] VM Command DTMF Set-GETMSG= H
[609] Voice Mail Access Codes-Mailbox ID code=Mailbox number
[990] System Additional Information-Field (18)=1
M
Features 3-41