Table of Contents
Advertisement
5.4
Setting COS (Class of Service)
Parameters
Message Cancel for Live Call Screening Status
Direct Mailbox Access Status
Intercom Paging Group Number
Subscriber Service Prompt Mode
Tip:
Message Notification Status
Tip:
31
The current setting is played.
Press
to change the current setting (enable or disable).
1
32
Confirm your entry and press
33
The current setting is played.
Press
to change the current setting (enable or disable).
1
34
Confirm your entry and press
35
The current setting is played.
Press
to change the current number.
1
36
Enter the group number (1 – 8).
37
Confirm your entry and press
38
The current setting is played.
Press
–
to change the desired mode.
1
3
39
Confirm your entry and press
Step 38 –
1
System Prompt
User 1 Prompt
2
3
User 2 Prompt
4
Accept the current prompt mode
40
The current setting is played.
Press
to change the setting (enable or disable).
1
If the Message Notification Status is enabled, go to step 41 – 45.
41
Press
1
–
5
to choose the desired Beeper Callback No.
Entry Mode or press
Step 41 –
You can set the way of pager access.
1
Caller Select Mode
2
Without Message Mode
3
Before Message Recording Mode
4
After Message Recording Mode
Disable All Entry Mode (Caller cannot access pager)
5
to accept it.
2
2
to accept it.
to accept it.
2
to accept it.
4
to accept it.
6
System Manager
5-9
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Chapters
Table of Contents
