Download  Print this page

Advertisement

Thank you for purchasing a Panasonic Pure IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDE100/KX-TDE200: PMMPR Software File Version 4.1000 or later

Installation Manual

Pure IP-PBX
KX-TDE100
Model No.
KX-TDE200
Document Version: 2010-08
SD Logo is
a trademark of
SD-3C, LLC.

Advertisement

Table of Contents

   Related Manuals for Panasonic KX-TDE100

   Summary of Contents for Panasonic KX-TDE100

  • Page 1: Installation Manual

    Thank you for purchasing a Panasonic Pure IP-PBX. Please read this manual carefully before using this product and save this manual for future use. SD Logo is KX-TDE100/KX-TDE200: PMMPR Software File Version 4.1000 or later a trademark of SD-3C, LLC.
  • Page 2: System Components

    System Components System Components System Components Table Category Model No. Description Shelves KX-TDE100 Basic Shelf KX-TDE200 Basic Shelf Main Processing Card IP Convergence Main Processing Card (IPCMPR) IPCMPR Option Cards KX-TDE0105 Memory Expansion Card (IPCMEC) KX-TDE0110 16-Channel VoIP DSP Card (DSP16)
  • Page 3 System Components Category Model No. Description KX-NCS2101 Activation Key for CA Basic for 1 User (CA Basic 1user) KX-NCS2105 Activation Key for CA Basic for 5 Users (CA Basic 5users) KX-NCS2110 Activation Key for CA Basic for 10 Users (CA Basic 10users) KX-NCS2140 Activation Key for CA Basic for 40 Users (CA Basic...
  • Page 4 System Components Category Model No. Description Physical Extension Cards KX-TDA0143 4 Cell Station Interface Card (CSIF4) KX-TDA0144 8 Cell Station Interface Card (CSIF8) KX-TDA0170 8-Port Digital Hybrid Extension Card (DHLC8) KX-TDA0171 8-Port Digital Extension Card (DLC8) KX-TDA0172 16-Port Digital Extension Card (DLC16) KX-TDA0173 8-Port Single Line Telephone Extension Card (SLC8)
  • Page 5 KX-T7775 Note that the types of activation keys are subject to change without notice. For CA activation keys, refer to the documentation for Equipment Compatibility Compatible Panasonic Proprietary Telephones The PBX supports the following telephones: • IP proprietary telephones (e.g., KX-NT300 series) •...
  • Page 6: Safety Notices

    System Components Note • For the equipment (e.g., Add-on Key Module, USB Module, Headset ) that can be connected to a particular telephone, refer to the telephone’s manual. • For other equipment that can be connected to the PBX, refer to "1.1.2 System Connection Diagram". The KX-T7090 headset can be connected to the KX-T7000, KX-T7200, KX-T7300, and KX-T7400 series telephones.
  • Page 7: Important Safety Instructions

    Important Safety Instructions Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: • Do not use the product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
  • Page 8: Important Information

    Important Information Important Information SAVE THESE INSTRUCTIONS WARNING SAFETY REQUIREMENTS For All Telephone Equipment • Do not install the product in any other way than described in relevant manuals. • The product must only be installed and serviced by qualified service personnel. The product should be used as-is from the time of purchase;...
  • Page 9 Unplug this unit of the system from the AC outlet if it emits smoke, an abnormal smell or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized Panasonic Factory Service Center. •...
  • Page 10 Contact your telephone company. If all SLTs operate properly, there may be a problem with your PBX. Do not reconnect the PBX to the CO lines until it has been serviced by an authorized Panasonic Factory Service Center. Installation Manual...
  • Page 11 Precaution Precaution WARNING REMOVE MEMORY CARD WHILE POWER SUPPLIED TO THE PBX Doing so may cause the PBX to fail to start when you try to restart the system. Document Version 2010-08 Installation Manual...
  • Page 12 Precaution Password Security CAUTION To the Administrator or Installer regarding the system password Please provide all system passwords to the customer. To avoid unauthorized access and possible abuse of the PBX, keep the passwords secret, and inform the customer of the importance of the passwords, and the possible dangers if they become known to others.
  • Page 13 Introduction Introduction This Installation Manual is designed to serve as an overall technical reference for the Panasonic Pure IP-PBX, KX-TDE100/KX-TDE200. It provides instructions for installing the hardware, and programming the PBX using the Maintenance Console. The Structure of this Manual...
  • Page 14 • Telephone numbers to which the system will be connected • Make: Panasonic • Model: KX-TDE100 and KX-TDE200 • Certification No.: found on the side of the unit • Ringer Equivalence No.: 0.3A •...
  • Page 15 F.C.C. REQUIREMENTS AND RELEVANT INFORMATION interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
  • Page 16: Table Of Contents

    Attaching a Ferrite Core ....................64 3.2.9 Fastening an Amphenol Connector ................66 3.2.10 Wall Mounting (KX-TDE200) ..................68 3.2.11 Wall Mounting (KX-TDE100) ..................70 3.2.12 Floor Standing (KX-TDE200 Only) .................72 3.2.13 Surge Protector Installation ....................74 Information about the Main Processing Card ..............77 3.3.1 IPCMPR Card .........................77...
  • Page 17 Table of Contents 3.6.4 DLC16 Card (KX-TDA0172) ..................102 3.6.5 SLC8 Card (KX-TDA0173) ...................104 3.6.6 EXT-CID Card (KX-TDA0168) ..................106 3.6.7 SLC16 Card (KX-TDA0174), MSLC16 Card (KX-TDA0175), and CSLC16 Card (KX-TDA0177) ......................107 3.6.8 IP-EXT16 Card (KX-TDA0470) ..................109 Information about the Other Physical Cards ..............111 3.7.1 OPB3 Card (KX-TDA0190) ..................111 3.7.2...
  • Page 18 Table of Contents Installation Manual Document Version 2010-08...
  • Page 19: System Outline

    Section 1 System Outline This section provides general information on the PBX, including the system capacity and specifications. Document Version 2010-08 Installation Manual...
  • Page 20: Basic System Construction

    The basic shelf contains an IPCMPR card for controlling the PBX. To use the system, install a power supply unit (PSU) in the PSU Slot and optional service cards in the basic shelf. KX-TDE100 KX-TDE200 Construction of the Basic Shelf...
  • Page 21: System Connection Diagram

    1.1.2 System Connection Diagram 1.1.2 System Connection Diagram Private ITSP IP Network Network CO (Telephone Company) Lines Analog/PRI/T1 Remote PC Pure IP-PBX Router (e.g., ADSL Modem) Batteries IP-PT IP Softphone, CA Client PC Fax Machine SIP Extension DSS Console Printer Wireless Phone IP-CS ISDN Telephone...
  • Page 22 1.1.2 System Connection Diagram LCOT16 CSLC16 (KX-TDA0181) (KX-TDA0177) LCOT8 (KX-TDA0180) LCOT4 MSLC16 (KX-TDA0183) (KX-TDA0175) CID8 (KX-TDA0193) SLC16 (KX-TDA0174) Wireless Phone Fax Machine SLC8 Analog (KX-TDA0173) CO Line EXT-CID (KX-TDA0168) Telephone ISDN PRI Line PRI23 Company KX-DT300/ KX-DT300/ KX-DT346/ (Digital CO Line) DLC16 (KX-TDA0290) KX-T7600...
  • Page 23: Optional Equipment

    Power Supply Unit for the KX-TDE200. Total (PSU-L) power output of 279 W. Safety Class 1 compliant. KX-TDA0104 M-Type Power Supply Unit Power Supply Unit for the KX-TDE100 and (PSU-M) KX-TDE200. Total power output of 140.4 W. Safety Class 1 compliant. KX-TDA0108 S-Type Power Supply Unit Power Supply Unit for the KX-TDE100.
  • Page 24 NI (North American standard ISDN protocol) compliant. KX-TDA0470 16-Channel VoIP Extension Card 16-channel VoIP extension card. Compliant with (IP-EXT16) Panasonic proprietary protocol, and ITU-T G. 729A and G.711 codec methods. KX-TDA0484 4-Channel VoIP Gateway Card 4-channel VoIP gateway card. Compliant with (IP-GW4E) VoIP H.323 V.2 protocol, and ITU-T G.729A, G.
  • Page 25 1.2.1 Optional Equipment Model No. Model Name Description KX-TDA0490 16-Channel VoIP Gateway Card 16-channel VoIP gateway card. Compliant with (IP-GW16) VoIP H.323 V.2 protocol, and ITU-T G.729A, G. 723.1 and G.711 codec methods. Note For the maximum number of optional service cards that can be installed in the PBX, refer to "1.3.3 System Capacity".
  • Page 26: Specifications

    1.3.1 General Description 1.3 Specifications 1.3.1 General Description Control Bus Original bus (16-bit, 8 MHz, 10 megabytes per second) Communication Bus H.100 bus conformity (1024 time slots) Switching Non-blocking Power Input PSU-S 100 V AC to 130 V AC; 1.4 A/200 V AC to 240 V AC; 0.8 A; 50 Hz/60 Hz PSU-M 100 V AC to 130 V AC;...
  • Page 27 1-pair wire (D1, D2) Module 334 mm (W) ´ 390 mm (H) ´ 272 mm (D) Dimension KX-TDE100 (13-1/3 in ´ 15-3/5 in ´ 10-3/4 in) 430 mm (W) ´ 415 mm (H) ´ 276 mm (D) KX-TDE200 (17-1/5 in ´ 16-3/5 in ´ 10-7/8 in)
  • Page 28: Characteristics

    1.3.2 Characteristics 1.3.2 Characteristics Terminal Equipment Loop Limit • PT: KX-DT300/KX-T7600 series DPT: 90 W; all other DPTs/APTs: 40 W SLT: 600 W including set • • Doorphone: 20 W CS: 130 W; PT-interface CS: 65 W • 15 000 W minimum Minimum Leakage Resistance Maximum Number of Extension for PT or SLT...
  • Page 29: System Capacity

    1.3.3 System Capacity 1.3.3 System Capacity Type and Maximum Number of Slots The PBX supports the following type and number of slots. Maximum Number Slot Type KX-TDE100 KX-TDE200 IPCMPR Card Slot Free Slot Virtual CO Line Slot Virtual Slot Virtual Extension Slot...
  • Page 30 1.3.3 System Capacity Virtual Slots of the IPCMPR Card Virtual Virtual CO Line Slots Extension Slots Virtual Slots IPCMPR Card Maximum Optional Service Cards The following number of cards can be installed in the Free Slots or Virtual Slots of the PBX. Note •...
  • Page 31 1.3.3 System Capacity Cards Installed in Free Slots or Virtual Slots Maximum Number Card Type KX-TDE100 KX-TDE200 IPCMPR CO Line Card Virtual CO Line Card V-IPGW16 V-SIPGW16 Physical CO Line Card Total 6 Total 8 LCOT8 LCOT16 PRI23 IP-GW4E IP-GW16...
  • Page 32 1.3.3 System Capacity Cards Mounted on Other Optional Service Cards Maximum Number Card Type Mounted on KX-TDE100 KX-TDE200 DSP16 DSP64 IPCMPR Card IPCMEC CID8 LCOT8 Card/LCOT16 Card EXT-CID SLC8 Card DPH4 ECHO16 MSG4 OPB3 Card ESVM4 EIO4 Only 1 ECHO16 card can be mounted on each OPB3 card.
  • Page 33 1.3.3 System Capacity DSP Card Resources The maximum number of simultaneous calls using IP protocols is determined by the type of call, codec(s) used, and digital signal processor (DSP) card installed in the PBX. Below are some example configurations and the maximum number of simultaneous calls for each. For Calls between Virtual CO Lines and Virtual Extensions Maximum Number of Simultaneous Calls Codec(s) Used...
  • Page 34 1.3.3 System Capacity Maximum Terminal Equipment The following shows the number of each terminal equipment type supported by the PBX. Terminal Equipment Type KX-TDE100 KX-TDE200 Telephone KX-DT300/KX-T7600 series DPT Other DPT IP-PT IP-PT (supported by IP-EXT16 card) IP-PT (supported by IPCMPR...
  • Page 35 1.3.3 System Capacity Note for KX-NT265 IP-PT users The supported card varies depending on the software version of your KX-NT265 IP-PT. To confirm the version, follow the procedure below: While starting up SP-PHONE SP-PHONE PROGRAM "AP Version". Select Select "Maintenance". "Version display".
  • Page 36 1.3.3 System Capacity PSU Capacity Each PSU supports a different load figure. PSU Type Maximum Load Figure PSU-S (for KX-TDE100 only) PSU-M PSU-L (for KX-TDE200 only) Calculation Example (KX-TDE200) Equipment Type Load Figure KX-T7600 series DPT 48 units Other DPT...
  • Page 37: Activation Key Installation

    Section 2 Activation Key Installation This section describes information on activation keys, including how to obtain an activation key and install it in the SD Memory Card. Document Version 2010-08 Installation Manual...
  • Page 38: Information About The Activation Keys

    2.1.1 Activation Keys 2.1 Information about the Activation Keys 2.1.1 Activation Keys To use IP CO lines and IP telephones on a private IP network using the IPCMPR card or to upgrade the software for enhanced features, you need the appropriate activation keys. Type and Maximum Number of Activation Keys The PBX supports the following type and number of activation keys: Supported IP CO lines/...
  • Page 39 2.1.1 Activation Keys Supported IP CO lines/ Maximum Activation Key Type Description IP Telephones/CA Number Users Allows the use of CA Basic for 128 CA Basic 128users 128 users users. Allows the use of CA Pro for 1 user. CA Pro 1user 128 users Allows the use of CA Pro for 5 users.
  • Page 40 2.1.1 Activation Keys Additional Activation Keys in the SD Memory Card (Activation Key Files) When the number of preinstalled activation keys on the DSP16/DSP64 card is not enough for the desired configuration or when you wish to use enhanced features, additional activation keys in the form of activation key files can be installed on the SD Memory Card.
  • Page 41 2.1.1 Activation Keys Model No. Activation Key Type Maximum Number Supported CA Users KX-NCS2110 CA Basic 10users 120 users KX-NCS2140 CA Basic 40users 120 users KX-NCS2149 CA Basic 128users 128 users KX-NCS2201 CA Pro 1user 128 users KX-NCS2205 CA Pro 5users 125 users KX-NCS2210 CA Pro 10users...
  • Page 42 2.1.1 Activation Keys Activation Key Installation Example The following shows an example of when using 16 H.323 CO lines, 16 SIP CO lines, 32 IP-PTs, 32 IP softphones, and 64 SIP Extensions on a private IP network using the IPCMPR card. Virtual CO Line Virtual Extension Slots...
  • Page 43: Activation Key Code And Key Management System

    2.1.2 Activation Key Code and Key Management System 2.1.2 Activation Key Code and Key Management System To obtain additional activation keys, you need to purchase the appropriate activation key codes and access the Key Management System. You can download the activation keys as an activation key file from the Key Management System.
  • Page 44: Activation Key File

    2.1.3 Activation Key File 2.1.3 Activation Key File The corresponding number of IP CO lines and IP telephones or enhanced features can be activated by installing the downloaded activation key file(s) in the SD Memory Card of the IPCMPR card using the Maintenance Console.
  • Page 45: Installation

    Section 3 Installation This section describes the procedures to install the PBX. Detailed instructions for planning the installation site, installing the shelves and optional service cards, and cabling of peripheral equipment are provided. Further information on system expansion and peripheral equipment installation is included.
  • Page 46: Before Installation

    Anti-static precautions should be taken during installation. Installation Precautions This set is made for wall mounting (KX-TDE100/KX-TDE200) or floor standing (KX-TDE200 only), and should be installed in a location where it is accessible for inspections and maintenance. To prevent malfunction, noise,...
  • Page 47 3.1.1 Before Installation • Do not stack up the optional service cards. Wiring Precautions Be sure to follow these instructions when wiring the unit: CAUTION • Avoid using the same AC outlet for computers, telexes, and other office equipment, as noise generated by such equipment may hamper system performance or interrupt the system.
  • Page 48: Installation Of The Pbx

    3.2.1 Unpacking 3.2 Installation of the PBX 3.2.1 Unpacking Unpack the box and check the items below: KX-TDE100 KX-TDE200 Main Unit Ferrite Core (for the IPCMPR card) Metal Bracket Screw A Screw B (Black) Anchor Plug Mini Plug (for pager and music source)
  • Page 49: Names And Locations

    3.2.2 Names and Locations 3.2.2 Names and Locations Inside View KX-TDE100 KX-TDE200 RUN Indicator ALARM Indicator MNT Port LAN Port PSU Slot Null Slot (not available for any optional service card) Free Slots 1 to 6 (from the left) IPCMPR Card Slot...
  • Page 50: Opening/closing The

    3.2.3 Opening/Closing the Front Cover 3.2.3 Opening/Closing the Front Cover Opening the Front Cover Insert a flathead screwdriver into the opening (on the left of the screw cover) and unlatch the screw cover. Screw Cover Turn the screw anticlockwise to loosen. Slide the front cover to the right until it stops, then lift the front cover.
  • Page 51 3.2.3 Opening/Closing the Front Cover Closing the Front Cover Hook the front cover onto the shelf (line up the protrusions on the cover with the receptacles on the shelf). Then slide the front cover to the left until it locks. Turn the screw clockwise to tighten.
  • Page 52: Installing/replacing The Power Supply Unit

    Lower/Upper Input Voltage Range Current Input Frequency Lower: 100 V AC to 130 V AC 1.4 A PSU-S (for KX-TDE100) Upper: 200 V AC to 240 V AC 0.8 A Lower: 100 V AC to 130 V AC 2.5 A PSU-M...
  • Page 53: Installing The Power Supply Unit

    3.2.4 Installing/Replacing the Power Supply Unit Notice When installing or replacing a PSU, read Important Safety Instructions and Important Information in this manual carefully, and always follow these guidelines to reduce the risk of fire, electric shock and injury. Note For details about frame ground connection, refer to "3.2.5 Frame Ground Connection".
  • Page 54 3.2.4 Installing/Replacing the Power Supply Unit Push the release lever in the direction of the arrow, so that the PSU engages securely with the connector on the back board. Back Board Release Lever Turn the 4 screws clockwise, in the order indicated by the numbers 1 to 4, to fix the PSU. Screws Replacing the Power Supply Unit Unplug the AC power cord.
  • Page 55 3.2.4 Installing/Replacing the Power Supply Unit Turn the 4 screws anticlockwise to loosen them. Screws Pull the release lever in the direction of the arrow to disconnect the PSU from the back board. Back Board Release Lever Replace the PSU. New PSU Current PSU Follow the steps in "Installing the Power Supply Unit".
  • Page 56: Frame Ground Connection

    3.2.5 Frame Ground Connection 3.2.5 Frame Ground Connection Loosen the screw. Screw Insert a grounding wire (user-supplied). Tighten the screw. Connect the grounding wire to ground. Grounding wire To ground WARNING • Proper grounding (connection to ground) is very important to protect the PBX from the bad effects of external noise or to reduce the risk to the user of electrocution in the case of a lightning strike.
  • Page 57: Installing/removing The Optional Service Cards

    3.2.6 Installing/Removing the Optional Service Cards 3.2.6 Installing/Removing the Optional Service Cards CAUTION • To protect the back board from static electricity, do not touch parts on the back board in the main unit and on the optional service cards. To discharge static electricity, touch ground or wear a grounding strap.
  • Page 58 3.2.6 Installing/Removing the Optional Service Cards Turn the 2 screws clockwise to fix the card in place. Screws Note Make sure the screws are tightened to ground the card securely. Installation Manual Document Version 2010-08...
  • Page 59 3.2.6 Installing/Removing the Optional Service Cards Covering the Blank Slots Be sure to cover each slot in which no optional service card is installed by using a Blank Slot Cover. CAUTION Failure to install the Blank Slot Cover may cause electromagnetic interference. Document Version 2010-08 Installation Manual...
  • Page 60 3.2.6 Installing/Removing the Optional Service Cards Handling of the Cables When cables are connected to the PBX, run the cables to either the right or the left and then towards the back of the shelf as shown below. Note For safety reasons, do not stretch, bend, or pinch the AC power cord. Installation Manual Document Version 2010-08...
  • Page 61 3.2.6 Installing/Removing the Optional Service Cards Removing the Optional Service Cards Turn the 2 screws anticlockwise to loosen them. Screws Pull the release lever in the direction of the arrow to disconnect the card from the back board. Pull the card from the shelf to remove it.
  • Page 62: Types Of Connectors

    3.2.7 Types of Connectors 3.2.7 Types of Connectors Connector Type Pin Number Used for • DHLC8 (KX-TDA0170) RJ11 • SLC8 (KX-TDA0173) • SLC16 (KX-TDA0174) • MSLC16 (KX-TDA0175) • CSLC16 (KX-TDA0177) • LCOT8 (KX-TDA0180) • LCOT16 (KX-TDA0181) (Twisted pair cable) • IPCMPR RJ45 •...
  • Page 63 3.2.7 Types of Connectors Connector Type Pin Number Used for • Basic Shelf RS-232C (Shielded cable) • IPCMPR Mini Plug Document Version 2010-08 Installation Manual...
  • Page 64: Attaching A Ferrite Core

    3.2.8 Attaching a Ferrite Core 3.2.8 Attaching a Ferrite Core A ferrite core must be attached when: • an RJ45 connector is connected to an IPCMPR, IP-GW16 or IP-EXT16 cards, or • an Amphenol connector is connected to an extension card. Attaching to an RJ45 Connector For the IPCMPR Card Wrap the cable once around the ferrite core, then close the case of the ferrite core.
  • Page 65 3.2.8 Attaching a Ferrite Core Attaching to an Amphenol Connector For Extension Cards Pass the cable through the ferrite core, then close the case of the ferrite core. Attach the ferrite core 3 cm (1-3/16 in) away from the connector. The ferrite core is included with the card. 3 cm (1-3/16 in) If you need to open the ferrite core, use a flathead screwdriver to unlatch the case of the ferrite core.
  • Page 66: Fastening An Amphenol Connector

    3.2.9 Fastening an Amphenol Connector 3.2.9 Fastening an Amphenol Connector An Amphenol 57JE-type connector is used on some of the optional service cards. To connect an Amphenol connector, use the spring latch or screw to fix the upper part and use Velcro® tape to fix the lower part of the connector.
  • Page 67 3.2.9 Fastening an Amphenol Connector Amphenol Connector Pin Assignment Chart Below is an Amphenol connector pin assignment chart for all optional service cards that use the Amphenol connector. For more details, refer to the appropriate section in "3.5 Information about the Physical CO Line Cards"...
  • Page 68: Wall Mounting (kx-tde200)

    3.2.10 Wall Mounting (KX-TDE200) 3.2.10 Wall Mounting (KX-TDE200) WARNING • Make sure that the wall that the shelf will be attached to is strong enough to support the shelf. If not, it is necessary for the wall to be reinforced. •...
  • Page 69 3.2.10 Wall Mounting (KX-TDE200) Install 4 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 4 screws (A). Anchor Plug Hammer W a ll Anchor Plug 8 mm Metal Bracket (5/16 in) 30 mm (1-3/16 in) Screw (A)
  • Page 70: Wall Mounting (kx-tde100)

    3.2.11 Wall Mounting (KX-TDE100) 3.2.11 Wall Mounting (KX-TDE100) WARNING • Make sure that the wall that the shelf will be attached to is strong enough to support the shelf. If not, it is necessary for the wall to be reinforced.
  • Page 71 3.2.11 Wall Mounting (KX-TDE100) Install 3 anchor plugs in the wall, using the metal bracket as a template. Fix the metal bracket with 3 screws (A). Anchor Plug Hammer Anchor Plug 8 mm W a ll (5/16 in) Metal Bracket...
  • Page 72: Floor Standing (kx-tde200 Only)

    3.2.12 Floor Standing (KX-TDE200 Only) 3.2.12 Floor Standing (KX-TDE200 Only) WARNING Be careful not to drop any components. Dropping components may damage them or cause an injury. CAUTION • Do not block the openings of the shelf. Allow space of at least 20 cm (8 in) above and 10 cm (4 in) at the sides of the shelf.
  • Page 73 3.2.12 Floor Standing (KX-TDE200 Only) Lift the shelf, attach it to the metal bracket, slide it backwards until it locks, and retain it with 2 screws (B). FRONT Screws (B) Metal Bracket Fix the front cover on the shelf (refer to "3.2.3 Opening/Closing the Front Cover"). Document Version 2010-08 Installation Manual...
  • Page 74: Surge Protector Installation

    3.2.13 Surge Protector Installation 3.2.13 Surge Protector Installation CAUTION Performing surge protection is essential. Make sure to follow the instructions in this section. Overview A massive electrical surge can be caused if lightning strikes a telephone cable 10 m (33 ft) above ground, or if a telephone line comes into contact with a power line.
  • Page 75 3.2.13 Surge Protector Installation Outside Installation (Main Building) Surge Protector CO Line (Another Building) CO Line Extn. PT-interface CS Terminal Board Surge Extn. Protector Extn. Extn. PT-interface CS Ground Extn.: Extension Line If you install an extension outside of the building, the following precautions are recommended: Install the extension wire underground.
  • Page 76 3.2.13 Surge Protector Installation Connect the ground rod to the surge protector using a grounding wire with a cross-sectional area of at least 1.3 mm Bury the ground rod near the protector. The grounding wire should be as short as possible. The grounding wire should run straight to the ground rod.
  • Page 77: Information About The Main Processing Card

    3.3.1 IPCMPR Card 3.3 Information about the Main Processing Card 3.3.1 IPCMPR Card Function The IPCMPR card is the preinstalled main processing card with built-in ESVM card feature (2-channel) and an Activation Key for CA Basic for 10 users. The Virtual Cards (CO line/extension) can be installed in Virtual Slots of the IPCMPR card and can be activated with the activation keys.
  • Page 78 3.3.1 IPCMPR Card WARNING A lithium battery is used in the IPCMPR card. There is a risk of explosion if the battery is replaced with the incorrect type. Dispose of used batteries according to the manufacturer’s instructions. CAUTION • The SD Memory Card contains software for all the processes of the PBX and all the customer data. It can be easily removed and taken away from the PBX by a third party.
  • Page 79 3.3.1 IPCMPR Card LED Indications Indication Color Description BATT ALARM Battery alarm indication • OFF: Normal ON: Alarm SD ACCESS Green SD memory card status • ON: Accessing 10BASE-T/ LINK Green Link status indication 100BASE-TX • OFF: Off-line • ON: Linked normally •...
  • Page 80: Dsp16 Card (kx-tde0110) And Dsp64 Card (kx-tde0111)

    3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card (KX-TDE0111) 3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card (KX-TDE0111) Function DSP16: 16-channel digital signal processor card with a 4-Channel IP Trunk activation key and a 8-Channel IP Proprietary Telephone activation key preinstalled. Compliant with ITU-T G. 729A and G.711 codec methods.
  • Page 81 3.3.2 DSP16 Card (KX-TDE0110) and DSP64 Card (KX-TDE0111) • When installing the DSP16 or DSP64 card, hold down the shaded areas of the card to connect it firmly. Document Version 2010-08 Installation Manual...
  • Page 82: Ipcmec Card (kx-tde0105)

    3.3.3 IPCMEC Card (KX-TDE0105) 3.3.3 IPCMEC Card (KX-TDE0105) Function Memory expansion card to increase system data storage space. To be mounted on the IPCMPR card. IPCMPR Card inside IPCMEC Card Screw Accessories and User-supplied Items Accessories (included): Screws ´ 2 User-supplied (not included): none CAUTION •...
  • Page 83: Rmt Card (kx-tda0196)

    3.3.4 RMT Card (KX-TDA0196) 3.3.4 RMT Card (KX-TDA0196) Function Analog modem card for remote communication with the PBX. ITU-T V.90 support. To be mounted on the IPCMPR card. IPCMPR Card inside RMT Card Screw Accessories and User-supplied Items Accessories (included): Screws ´ 2 User-supplied (not included): none Document Version 2010-08 Installation Manual...
  • Page 84: Information About The Virtual Cards

    3261, 3262, 3264, 3311, 3581, 3960 and 4028 protocols, and ITU-T G.729A and G.711 codec methods. Also supports T.38 protocol. Virtual 32-Channel VoIP Extension Virtual Card for 32 VoIP extensions. Compliant with Panasonic Card (V-IPEXT32) proprietary protocol. Virtual 32-Channel SIP Extension Card Virtual Card for 32 SIP Extensions.
  • Page 85: Information About The Physical Co Line Cards

    3.5.1 LCOT8 Card (KX-TDA0180) and LCOT16 Card (KX-TDA0181) 3.5 Information about the Physical CO Line Cards 3.5.1 LCOT8 Card (KX-TDA0180) and LCOT16 Card (KX-TDA0181) Function LCOT8: 8-port analog CO line card with 2 power failure transfer (PFT) ports. One CID8 card can be mounted on the LCOT8 card (refer to "3.5.2 CID8 Card (KX-TDA0193)").
  • Page 86 3.5.1 LCOT8 Card (KX-TDA0180) and LCOT16 Card (KX-TDA0181) Pin Assignments Amphenol Connector Signal Function Signal Name Function Name Ring port 1 Tip port 1 Ring port 2 Tip port 2 Ring port 3 Tip port 3 Ring port 4 Tip port 4 Ring port 5 Tip port 5 Ring port 6...
  • Page 87: Cid8 Card (kx-tda0193)

    3.5.2 CID8 Card (KX-TDA0193) 3.5.2 CID8 Card (KX-TDA0193) Function 8-port Caller ID signal type FSK/FSK (with Call Waiting Caller ID [Visual Caller ID])/DTMF. To be mounted on the LCOT8/LCOT16 cards. LCOT16 card only inside CID8 Card Screw S W 1 Accessories and User-supplied Items Accessories (included): Screws ´...
  • Page 88: T1 Card (kx-tda0187)

    3.5.3 T1 Card (KX-TDA0187) 3.5.3 T1 Card (KX-TDA0187) Function 1-port T1 CO line card. EIA/TIA standard compliant. LEDs RJ45 To NT1 Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector CAUTION • T1 ports are SELV ports and should only be connected to SELV services. •...
  • Page 89 3.5.3 T1 Card (KX-TDA0187) Pin Assignments RJ45 Connector Signal Name Level [V] Function Receive data (+) Receive data (-) Reserved – – Transmit data (-) Transmit data (+) Reserved – – LED Indications Indication Color Description CARD STATUS Green/Red Card status indication •...
  • Page 90: Pri23 Card (kx-tda0290)

    3.5.4 PRI23 Card (KX-TDA0290) 3.5.4 PRI23 Card (KX-TDA0290) Function 1-port ISDN Primary Rate Interface card (23B channels). NI (North American standard ISDN protocol) compliant. LEDs RJ45 To NT1 Accessories and User-supplied Items Accessories (included): none User-supplied (not included): RJ45 connector CAUTION •...
  • Page 91 3.5.4 PRI23 Card (KX-TDA0290) Pin Assignments RJ45 Connector Signal Name Level [V] Function Receive data (+) Receive data (-) Reserved – – Transmit data (-) Transmit data (+) Reserved – – LED Indications Indication Color Description CARD STATUS Green/Red Card status indication •...
  • Page 92: Ip-gw4e Card (kx-tda0484)

    3.5.5 IP-GW4E Card (KX-TDA0484) 3.5.5 IP-GW4E Card (KX-TDA0484) Function 4-channel VoIP gateway card. Compliant with VoIP H.323 V.2 protocol, and ITU-T G.729A, G.723.1 and G. 711 codec methods. LEDs RJ45 (10BASE-T/100BASE-TX) To private IP network Accessories and User-supplied Items Accessories (included): CD-ROM (including documentation for web programming) ´ 1 User-supplied (not included): RJ45 connector Note •...
  • Page 93 3.5.5 IP-GW4E Card (KX-TDA0484) LED Indications Indication Color Description CARD STATUS Green/Red Card status indication • OFF: Power Off • Green ON: Normal (all ports are idle) • Green Flashing (60 times per minute): Normal (a port is in use) •...
  • Page 94: Ip-gw16 Card (kx-tda0490)

    3.5.6 IP-GW16 Card (KX-TDA0490) 3.5.6 IP-GW16 Card (KX-TDA0490) Function 16-channel VoIP gateway card. Compliant with VoIP H.323 V.2 protocol, and ITU-T G.729A, G.723.1 and G. 711 codec methods. LEDs RJ45 (10BASE-T/100BASE-TX Full Duplex) To private IP network Accessories and User-supplied Items Accessories (included): Ferrite core ´...
  • Page 95 3.5.6 IP-GW16 Card (KX-TDA0490) LED Indications Indication Color Description CARD STATUS Green/Red Card status indication • OFF: Power Off • Green ON: Normal (all ports are idle) • Green Flashing (60 times per minute): Normal (a port is in use) •...
  • Page 96: Information About The Physical Extension Cards

    3.6.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144) 3.6 Information about the Physical Extension Cards 3.6.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144) Function CSIF4: 4-port CS interface card for 4 CSs. CSIF8: 8-port CS interface card for 8 CSs. RJ45 (LINE 1 to LINE 8) To CS...
  • Page 97 3.6.1 CSIF4 Card (KX-TDA0143) and CSIF8 Card (KX-TDA0144) Example: When the CSIF4 card has been installed The contents and design of the software are subject to change without notice. Pin Assignments RJ45 Connector Signal Name Function Reserved – Data port (High) POWH Power (High) POWL...
  • Page 98: Dhlc8 Card (kx-tda0170)

    3.6.2 DHLC8 Card (KX-TDA0170) 3.6.2 DHLC8 Card (KX-TDA0170) Function 8-port digital hybrid extension card for DPTs, APTs, SLTs, DSS consoles, and PT-interface CSs, with 2 power failure transfer (PFT) ports. Amphenol To extensions Accessories and User-supplied Items Accessories (included): Screws ´ 2, Ferrite core ´ 1 User-supplied (not included): Amphenol connector Note •...
  • Page 99 3.6.2 DHLC8 Card (KX-TDA0170) Signal Function Signal Name Function Name PT Data port 3 PT Data port 3 (Low) (High) Reserved – Reserved – SLT Ring port 4 SLT Tip port 4 PT Data port 4 PT Data port 4 (Low) (High) Reserved...
  • Page 100: Dlc8 Card (kx-tda0171)

    3.6.3 DLC8 Card (KX-TDA0171) 3.6.3 DLC8 Card (KX-TDA0171) Function 8-port digital extension card for DPTs, DSS consoles, and PT-interface CSs. Amphenol To extensions Accessories and User-supplied Items Accessories (included): Screws ´ 2, Ferrite core ´ 1 User-supplied (not included): Amphenol connector Note •...
  • Page 101 3.6.3 DLC8 Card (KX-TDA0171) Signal Function Signal Name Function Name Data port 5 (Low) Data port 5 (High) 15-16 Reserved – 40-41 Reserved – Data port 6 (Low) Data port 6 (High) 18-19 Reserved – 43-44 Reserved – Data port 7 (Low) Data port 7 (High) 21-22 Reserved...
  • Page 102: Dlc16 Card (kx-tda0172)

    3.6.4 DLC16 Card (KX-TDA0172) 3.6.4 DLC16 Card (KX-TDA0172) Function 16-port digital extension card for DPTs, DSS consoles, and PT-interface CSs. Amphenol To extensions Accessories and User-supplied Items Accessories (included): Screws ´ 2, Ferrite core ´ 1 User-supplied (not included): Amphenol connector Note •...
  • Page 103 3.6.4 DLC16 Card (KX-TDA0172) Signal Signal Function Function Name Name Data port 10 Data port 10 (Low) (High) Data port 11 Data port 11 (Low) (High) Data port 12 Data port 12 (Low) (High) Data port 13 Data port 13 (Low) (High) Data port 14...
  • Page 104: Slc8 Card (kx-tda0173)

    3.6.5 SLC8 Card (KX-TDA0173) 3.6.5 SLC8 Card (KX-TDA0173) Function 8-port extension card for SLTs with 2 power failure transfer (PFT) ports. Amphenol To extensions Accessories and User-supplied Items Accessories (included): Screws ´ 2, Ferrite core ´ 1 User-supplied (not included): Amphenol connector Note •...
  • Page 105 3.6.5 SLC8 Card (KX-TDA0173) Pin Assignments Amphenol Connector Signal Function Signal Name Function Name Ring port 1 Tip port 1 Reserved – 27-28 Reserved – Ring port 2 Tip port 2 Reserved – 30-31 Reserved – Ring port 3 Tip port 3 Reserved –...
  • Page 106: Ext-cid Card (kx-tda0168)

    3.6.6 EXT-CID Card (KX-TDA0168) 3.6.6 EXT-CID Card (KX-TDA0168) Function Sends Caller ID signals (FSK) to extension ports. To be mounted on the SLC8 card only. inside SLC8 Card Screw EXT-CID Card Accessories and User-supplied Items Accessories (included): Screws ´ 2 User-supplied (not included): none Installation Manual Document Version 2010-08...
  • Page 107: Slc16 Card (kx-tda0174), Mslc16 Card (kx-tda0175), And Cslc16 Card (kx-tda0177)

    Accessories (included): Screws ´ 2, Ferrite core ´ 1 User-supplied (not included): Amphenol connector Note • Panasonic SLT with Message Waiting Lamp is recommended for connection to the MSLC16 card. • Attach the included ferrite core to the cable. Refer to "3.2.8 Attaching a Ferrite Core". •...
  • Page 108 3.6.7 SLC16 Card (KX-TDA0174), MSLC16 Card (KX-TDA0175), and CSLC16 Card (KX-TDA0177) Pin Assignments Amphenol Connector Signal Name Function Signal Name Function Ring port 1 Tip port 1 Ring port 2 Tip port 2 Ring port 3 Tip port 3 Ring port 4 Tip port 4 Ring port 5 Tip port 5...
  • Page 109: Ip-ext16 Card (kx-tda0470)

    3.6.8 IP-EXT16 Card (KX-TDA0470) 3.6.8 IP-EXT16 Card (KX-TDA0470) Function 16-channel VoIP extension card. Compliant with Panasonic proprietary protocol, and ITU-T G.729A and G. 711 codec methods. LEDs RJ45 (10BASE-T/100BASE-TX Full Duplex) To LAN Accessories and User-supplied Items Accessories (included): Ferrite core ´ 1...
  • Page 110 If the LINK indicator is OFF, the ONLINE indicator will also be OFF. ALARM Alarm indication • OFF: Normal • ON: Alarm VoIP BUSY Green Panasonic proprietary VoIP protocol process indication • OFF: VoIP process inactive • ON: VoIP process active LINK Green Link status indication •...
  • Page 111: Information About The Other Physical Cards

    3.7.1 OPB3 Card (KX-TDA0190) 3.7 Information about the Other Physical Cards 3.7.1 OPB3 Card (KX-TDA0190) Function Optional 3-slot base card for mounting a maximum of 3 option cards from the following: • DPH4 card • EIO4 card • ECHO16 card •...
  • Page 112: Dph4 Card (kx-tda0161)

    3.7.2 DPH4 Card (KX-TDA0161) 3.7.2 DPH4 Card (KX-TDA0161) Function 4-port doorphone card for 4 doorphones and 4 door openers. To be mounted on the OPB3 card. Fully insert the connectors through the panel openings. DPH4 Card OPB3 Card 8-pin Screw 10-pin Accessories and User-supplied Items Accessories (included): Screws ´...
  • Page 113 3.7.2 DPH4 Card (KX-TDA0161) Pin Assignments 8-pin Terminal Block Signal Name Function Doorphone 4 transmit com4 Doorphone 4 receive Doorphone 3 transmit com3 Doorphone 3 receive Doorphone 2 transmit com2 Doorphone 2 receive Doorphone 1 transmit com1 Doorphone 1 receive 10-pin Terminal Block Signal Name Function...
  • Page 114: Eio4 Card (kx-tda0164)

    3.7.3 EIO4 Card (KX-TDA0164) 3.7.3 EIO4 Card (KX-TDA0164) Function 4-port external input/output card. To be mounted on the OPB3 card. Fully insert the connectors through the panel openings. EIO4 Card OPB3 Card 8-pin Screw 10-pin Accessories and User-supplied Items Accessories (included): Screws ´ 3, 10-pin terminal block ´ 1, 8-pin terminal block ´ 1 User-supplied (not included): Copper wire Note For details about connection to external sensors and external relays, refer to "3.9.1 Connection of...
  • Page 115 3.7.3 EIO4 Card (KX-TDA0164) Pin Assignments 8-pin Terminal Block Signal Name Function Control 4 Control 4 com Control 3 Control 3 com Control 2 Control 2 com Control 1 Control 1 com 10-pin Terminal Block Signal Name Function Reserved – OP4b Opener 4 OP4a...
  • Page 116 3.7.3 EIO4 Card (KX-TDA0164) External Sensor Power to the external sensor is provided from the EIO4 card and must be grounded through the EIO4 card as indicated in the diagram below. A pair of "sensor" and "common" lines are connected to the EIO4 card for each external sensor.
  • Page 117: Echo16 Card (kx-tda0166)

    3.7.4 ECHO16 Card (KX-TDA0166) 3.7.4 ECHO16 Card (KX-TDA0166) Function 16-channel card for echo cancellation during conferences. To be mounted on the OPB3 card. OPB3 Card inside ECHO16 Card Screw Accessories and User-supplied Items Accessories (included): Screws ´ 3 User-supplied (not included): none Note To establish a conference call involving 6 to 8 parties, install an ECHO16 card and enable echo cancellation for conferences using the Maintenance Console.
  • Page 118: Msg4 Card (kx-tda0191)

    3.7.5 MSG4 Card (KX-TDA0191) 3.7.5 MSG4 Card (KX-TDA0191) Function 4-channel message card. To be mounted on the OPB3 card. OPB3 Card inside MSG4 Card Screw Accessories and User-supplied Items Accessories (included): Screws ´ 3 User-supplied (not included): none Installation Manual Document Version 2010-08...
  • Page 119: Esvm4 Card (kx-tda0194)

    3.7.6 ESVM4 Card (KX-TDA0194) 3.7.6 ESVM4 Card (KX-TDA0194) Function 4-channel simplified voice message card for Simplified Voice Message feature. Also supports MSG card features. To be mounted on the OPB3 card. OPB3 Card inside ESVM4 Card Screw Accessories and User-supplied Items Accessories (included): Screws ´...
  • Page 120: Connection Of Extensions

    3.8.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable) 3.8 Connection of Extensions 3.8.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable) PT-interface CS Cable Maximum Distance 26 AWG: 222 m (728 ft) 24 AWG: 347 m (1138 ft) 22 AWG: 500 m (1640 ft) CAT 5:...
  • Page 121 3.8.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable) PT-interface CS Console DHLC8 Card ü ü ü ü ü MSLC16, CSLC16, ü SLC16, SLC8 Cards DLC16, DLC8 Cards ü ü ü "ü" indicates that the extension card supports the terminal. Document Version 2010-08 Installation Manual...
  • Page 122: Parallel Connection Of The Extensions

    3.8.2 Parallel Connection of the Extensions 3.8.2 Parallel Connection of the Extensions Any SLT can be connected in parallel with an APT or a DPT as follows. Note In addition to an SLT, an answering machine, a fax machine or a modem (PC) can be connected in parallel with an APT or a DPT.
  • Page 123 3.8.2 Parallel Connection of the Extensions With DPT Parallel mode or eXtra Device Port (XDP) mode can be selected through system programming. If XDP mode is enabled through system programming, parallel connection is not possible. Refer to "13.1.2 Paralleled Telephone" and "5.1.7 Extension Port Configuration" in the Feature Manual for further information.
  • Page 124 3.8.2 Parallel Connection of the Extensions With KX-T7600 Series DPT (except KX-T7665) To DHLC8 card 2-conductor wiring cord 4-conductor wiring cord Connect pins "T" and "R". Connect pins "T", "R", "D1" and "D2". TO MAIN UNIT TO TEL / PABX To DHLC8 card To SLT With Other DPT...
  • Page 125: Digital Extra Device Port (digital Xdp) Connection

    3.8.3 Digital EXtra Device Port (Digital XDP) Connection 3.8.3 Digital EXtra Device Port (Digital XDP) Connection A DPT can be connected to another DPT on the Digital XDP connection. In addition, if the DPT is connected to a DHLC8 card, it can also have an SLT connected in Parallel mode or XDP mode. Note •...
  • Page 126 3.8.3 Digital EXtra Device Port (Digital XDP) Connection Using an EXtra Device Port To DLC8/DLC16 card 4-conductor wiring cord To DHLC8 card Connect pins "T", "R", 2-conductor wiring cord (for connection of SLT) "D1" and "D2". Connect pins "T" and "R". 4-conductor wiring cord Connect pins "T", "R", "D1"...
  • Page 127 3.8.3 Digital EXtra Device Port (Digital XDP) Connection With KX-T7600 Series DPT Using a Modular T-Adaptor To DLC8/DLC16 card Modular To DHLC8 card T-Adaptor (for connection of SLT) 2-conductor wiring cord Connect pins "T" and "R". 4-conductor wiring cord Connect pins "D1" and "D2". 4-conductor wiring cord Connect pins "D1"...
  • Page 128 3.8.3 Digital EXtra Device Port (Digital XDP) Connection Using an EXtra Device Port To DLC8/DLC16 card 4-conductor wiring cord To DHLC8 card Connect pins "T", "R", 2-conductor wiring cord (for connection of SLT) "D1" and "D2". Connect pins "T" and "R". 4-conductor wiring cord Connect pins "T", "R", "D1"...
  • Page 129: First Party Call Control Cti Connection

    3.8.4 First Party Call Control CTI Connection 3.8.4 First Party Call Control CTI Connection CTI connection between a PC and a KX-DT343/KX-DT346/KX-T7633/KX-T7636 DPT provides first party call control. The CTI connection is made via a USB interface (version 2.0), and uses the TAPI 2.1 protocol. A USB Module must be connected to the DPT.
  • Page 130: Connection Of Doorphones, Door Openers, External Sensors, And External Relays

    3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays 3.9 Connection of Doorphones, Door Openers, External Sensors, and External Relays 3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays The PBX supports a maximum of 16 doorphones, 16 door openers, 16 external sensors, and 16 external relays. Note Doorphones, door openers, external sensors, and external relays are user-supplied.
  • Page 131 3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays Pass the wires through the hole in the base cover, and attach the base cover to a wall using 2 screws. Screw To 8-pin terminal block Note Two kinds of screws are included with a KX-T30865. Please choose the appropriate kind for your wall type.
  • Page 132 3.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays Connection Use 8-pin and 10-pin terminal blocks (included with the card) for connection. While pressing down on the hole at the top of the terminal block using a screwdriver, insert the wire into the side hole as shown below.
  • Page 133: Connection Of Peripherals

    3.10.1 Connection of Peripherals 3.10 Connection of Peripherals 3.10.1 Connection of Peripherals Maximum Distance 5 m (16 ft) Cable Maximum Distance 26 AWG: 10 m (32 ft) 24 AWG: 10 m (32 ft) MNT Port 22 AWG: 10 m (32 ft) CAT 5: 10 m (32 ft) Cable...
  • Page 134 3.10.1 Connection of Peripherals BGM/MOH The PBX provides Background Music and Music on Hold. Up to 2 external music sources (e.g., user-supplied radios) can be connected to the PBX. CAUTION • Wiring should be done carefully to prevent undue force being exerted on the plug. Otherwise, sound may only be heard intermittently.
  • Page 135 3.10.1 Connection of Peripherals Connection Charts For connecting a printer/PC with a 9-pin RS-232C connector PBX (9-pin) Printer/PC (9-pin) Circuit Type Signal Signal Circuit Type Pin No. Pin No. (EIA) Name Name (EIA) RD (RXD) RD (RXD) SD (TXD) SD (TXD) ER (DTR) ER (DTR) DR (DSR)
  • Page 136 3.10.1 Connection of Peripherals • Clear To Send (CTS):…(input) An ON condition of circuit CS (CTS) indicates that the printer or the PC is ready to receive data from the unit. The unit does not attempt to transfer data or receive data when circuit CS (CTS) is OFF. •...
  • Page 137: Lan Connection

    3.11.1 LAN Connection 3.11 LAN Connection 3.11.1 LAN Connection Connection Chart for LAN Connection The PBX is equipped with a LAN port for connecting to a LAN so that IP telephones (IP-PTs, IP softphones, SIP Extensions), IP-CSs, PCs and a CTI Server can be connected on a private IP network. IP Softphone LAN Port Switching Hub...
  • Page 138: Power Failure Connections

    3.12.1 Power Failure Connections 3.12 Power Failure Connections 3.12.1 Power Failure Connections When the power supply to the PBX fails, power failure transfer (PFT) will switch from the current connection to the Power Failure Connection. Refer to "13.1.11 Power Failure Transfer" in the Feature Manual for further information.
  • Page 139 3.12.1 Power Failure Connections RJ11 Connector Pin Assignments for Analog CO Line Card PFT Ports 1 and 2 Signal Name Function Ring port 2 Ring port 1 Tip port 1 Tip port 2 PFT Ports 3 and 4 (for LCOT16 card only) Signal Name Function Ring port 4...
  • Page 140: Starting The Pbx

    3.13.1 Starting the PBX 3.13 Starting the PBX 3.13.1 Starting the PBX Before Starting the PBX Before starting the PBX, please pay attention to the following: Notice The SD Memory Card must be inserted in the SD Memory Card slot of the IPCMPR card before startup. Starting the PBX CAUTION •...
  • Page 141 3.13.1 Starting the PBX Plug the AC power cord into the PBX and an AC outlet, and turn on the PBX. The RUN indicator will flash. Note For safety reasons, do not stretch, bend, or pinch the AC power cord. To AC Outlet While the RUN indicator is flashing, slide the System Initialize Switch back to the "NORMAL"...
  • Page 142 3.13.1 Starting the PBX Installation Manual Document Version 2010-08...
  • Page 143: Guide For The Maintenance Console

    Section 4 Guide for the Maintenance Console Explains the installation procedure, structure, and basic information of the Maintenance Console. Document Version 2010-08 Installation Manual...
  • Page 144: Overview

    4.1.1 Overview 4.1 Overview 4.1.1 Overview The Maintenance Console is designed to serve as an overall system programming reference for the PBX. To program and administer the PBX by PC, you need to install the Maintenance Console onto the PC. This section describes overview and installation of the Maintenance Console only.
  • Page 145: Pc Connection

    4.2.1 PC Connection 4.2 PC Connection 4.2.1 PC Connection Connection via MNT Port of IPCMPR Card MNT Port To LAN Port Notice When connecting a PC to the PBX, a fixed IP address must be assigned to the PC. For information about fixed IP addresses, ask your network administrator.
  • Page 146 4.2.1 PC Connection Make sure that both connector cases (frame ground) of the RS-232C cross cable (shielded cable) are conductive. If they are not conductive, make sure that both connector cases of the cable are firmly connected. If this is not possible, connect the frame of the PBX to the frame of the PC using a grounding wire in order to prevent difference in the electrical potentials.
  • Page 147 4.2.1 PC Connection Note • An AT command (for initialization, enabling automatic answer, etc.) can only be programmed by Maintenance Console. "AT&F" is stored as the default value. • For more information about the AT command, refer to the external modem’s instructions. Document Version 2010-08 Installation Manual...
  • Page 148: Installation Of The Maintenance Console

    4.3.1 Installing and Starting the Maintenance Console 4.3 Installation of the Maintenance Console 4.3.1 Installing and Starting the Maintenance Console System Requirements Required Operating System • Microsoft Windows XP, Windows Vista Business, or Windows 7 Professional operating system ® ® ®...
  • Page 149 4.3.1 Installing and Starting the Maintenance Console Click Connect. Select KX-TDE100/200 from PBX Model. Select the LAN or RS-232C tab, depending on the type of PC connection with the PBX. Specify the settings as required. Note When connecting to the PBX for the first time selecting LAN, the IP Address and Port Number must be set to 192.168.0.101 and 35300 respectively.
  • Page 150 4.3.1 Installing and Starting the Maintenance Console • The PC will not perform any shutdown operation, or enter the power-saving system standby mode while the Maintenance Console is connected to the PBX. To perform either of the operations above, first close the connection to the PBX. CAUTION Do not remove the SD Memory Card while power is supplied to the PBX.
  • Page 151: Troubleshooting

    Section 5 Troubleshooting This section provides information on the PBX and telephone troubleshooting. Document Version 2010-08 Installation Manual...
  • Page 152: Troubleshooting

    5.1.1 Installation 5.1 Troubleshooting 5.1.1 Installation PROBLEM PROBABLE CAUSE SOLUTION You cannot make/receive • • IP-EXT/IP-GW/DSP Replace the corresponding card. calls via an IP network. card malfunction • • IPCMPR card Replace the IPCMPR card (be sure to turn malfunction off the PBX when replacing).
  • Page 153 5.1.1 Installation PROBLEM PROBABLE CAUSE SOLUTION Extensions (except IP-PT/ • • Extension card Replace the corresponding card. SIP Extension) do not malfunction operate. • • Poor connection Take the extension and plug it into the between the PBX and same extension port using a short the extension telephone cord.
  • Page 154 5.1.1 Installation PROBLEM PROBABLE CAUSE SOLUTION The LINK indicator of the • • IP-EXT/IP-GW card Replace the corresponding card. IP-EXT/IP-GW/IPCMPR malfunction does not turn on. • • IPCMPR card Replace the IPCMPR card (be sure to turn malfunction off the PBX when replacing). •...
  • Page 155: Connection

    5.1.2 Connection 5.1.2 Connection Connection between the PBX and a PT: CAUSE SOLUTION Can you dial The T/R is connected to the D1/D2. Use the correct cord (the an extension? inner 2 wires are for T/R and the outer 2 wires are for D1/D2) Extension Connection between the PBX and an SLT:...
  • Page 156 5.1.2 Connection Connection between the central office and the PBX: CAUSE SOLUTION (Continued from the CO line is connected to the T2/T1. Reconnect the CO line to previous page.) the T1/R1 or T2/R2 of the telephone jack using 2- conductor wiring. Can you dial out on a CO line...
  • Page 157: Operation

    5.1.3 Operation 5.1.3 Operation PROBLEM PROBABLE CAUSE SOLUTION • • • Cannot set the IP An unusable value is Set an IP address within the valid range. address, subnet mask being set. IP address of the IP-PT/PBX: "1.0.0.0" to address, and PBX IP "223.255.255.255"...
  • Page 158 5.1.3 Operation PROBLEM PROBABLE CAUSE SOLUTION • • • Originating an outside The corresponding Program the flexible button. Refer to call, call transfer, or flexible button does not "6.1.3 Flexible Buttons" in the Feature conference cannot be exist on the PT. Manual.
  • Page 159: Using The Reset Button

    5.1.4 Using the Reset Button 5.1.4 Using the Reset Button If the PBX does not operate properly, use the Reset Button. Before using the Reset Button, try the system feature again to confirm whether there definitely is a problem or not. CAUTION In order to avoid possible corruption of data on the SD Memory Card, please ensure that the "SD ACCESS"...
  • Page 160: Troubleshooting By Error Log

    5.1.5 Troubleshooting by Error Log 5.1.5 Troubleshooting by Error Log When a major system error occurs in the PBX, the ALARM indicator on the front of the shelf turns on red, and the system logs the error information. Error Log Display Format Below is the display format of the error log.
  • Page 161 • 1: Shelf number • YY: Slot number – KX-TDE100 (Physical slot): 00 to 06 (00: IPCMPR Card Slot/Built-in ESVM card; 01 to 06: Free Slots) – KX-TDE200 (Physical slot): 00 to 11 (00: IPCMPR Card Slot/Built-in ESVM card; 01 to 11: Free Slots) –...
  • Page 162 5.1.5 Troubleshooting by Error Log Installation Manual Document Version 2010-08...
  • Page 163: Appendix

    Section 6 Appendix Document Version 2010-08 Installation Manual...
  • Page 164: Revision History

    6.1.1 PMMPR Software File Version 2.0xxx 6.1 Revision History 6.1.1 PMMPR Software File Version 2.0xxx New Options • System Components Table • 16-Port Single Line Telephone Extension Card with Caller ID (CSLC16) KX-TDA0177 • 4-Channel Simplified Voice Message Card (ESVM4) KX-TDA0194 •...
  • Page 165: Pmmpr Software File Version 2.01xx

    6.1.2 PMMPR Software File Version 2.01xx 6.1.2 PMMPR Software File Version 2.01xx New Options • System Components Table • 1-Channel IP Proprietary Telephone Activation Key (1 IP PT) KX-NCS4501 • 1-Channel SIP Extension Activation Key (1 SIP Extension) KX-NCS4701 • 1-Channel IP Softphone/IP Proprietary Telephone Activation Key (1 IP KX-NCS4201 Softphone/IP PT)
  • Page 166: Pmmpr Software File Version 3.0xxx

    6.1.3 PMMPR Software File Version 3.0xxx 6.1.3 PMMPR Software File Version 3.0xxx New Options • System Components Table – Activation Key for CA Basic for 1 User (CA Basic 1user) KX-NCS2101 – Activation Key for CA Basic for 5 Users (CA Basic 5users) KX-NCS2105 –...
  • Page 167: Pmmpr Software File Version 4.1xxx

    6.1.4 PMMPR Software File Version 4.1xxx 6.1.4 PMMPR Software File Version 4.1xxx Changed Contents • 1.3.3 System Capacity Document Version 2010-08 Installation Manual...
  • Page 168 6.1.4 PMMPR Software File Version 4.1xxx Installation Manual Document Version 2010-08...
  • Page 169: Index

    Index Document Version 2010-08 Installation Manual...
  • Page 170 Index Activation Key for CA Basic for 1 User (KX-NCS2101) Numerics Activation Key for CA Basic for 10 Users 16-Channel Echo Canceller Card (KX-TDA0166) 23, 117 (KX-NCS2110) 16-Channel IP Proprietary Telephone Activation Key Activation Key for CA Basic for 128 Users (KX-NCS4516) (KX-NCS2149) 16-Channel IP Softphone/IP Proprietary Telephone Activation...
  • Page 171 Index Doorphone 112, 130 KX-NCS4204 (4-Channel IP Softphone/IP Proprietary DPH4 Card (KX-TDA0161) Telephone Activation Key) DSP16 Card (KX-TDE0110) KX-NCS4208 (8-Channel IP Softphone/IP Proprietary DSP64 Card (KX-TDE0111) Telephone Activation Key) 40, 43 KX-NCS4216 (16-Channel IP Softphone/IP Proprietary Telephone Activation Key) KX-NCS4501 (1-Channel IP Proprietary Telephone Activation ECHO16 Card (KX-TDA0166) Key) Editing the CS Name using the Maintenance Console...
  • Page 172 System Connection Diagram System Initialization Procedure System Initialize Switch 140, 159 System Requirements Pager Panasonic Proprietary Telephones, Compatible Panasonic Proprietary Telephones, Incompatible Parallel Connection of the Extensions T1 Card (KX-TDA0187) Parallel Connection, Using a Modular T-Adaptor T-1 Trunk Card (KX-TDA0187)
  • Page 173 Virtual 32-Channel VoIP Extension Card (V-IPEXT32) Virtual Cards Virtual CO Line Slot Virtual Extension Slot V-SIPEXT32 (Virtual 32-Channel SIP Extension Card) V-SIPGW16 (Virtual 16-Channel SIP CO Line Card) Wall Mounting (KX-TDE100) Wall Mounting (KX-TDE200) Wiring Precautions Document Version 2010-08 Installation Manual...
  • Page 174 Copyright: This material is copyrighted by Panasonic System Networks Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic System Networks Co., Ltd. © Panasonic System Networks Co., Ltd. 2010...

This manual is also suitable for:

Pure ip-pbxKx-tde200

Comments to this Manuals

Symbols: 0
Latest comments: