Remote Commands - Panasonic JOIP BB-GT1540E Operating Instructions Manual

Remote commands

You can press dial keys to access
certain answering system functions
without waiting for the voice guidance to
prompt you.
Key Operation
Repeat message
{1}
(during playback)
Skip message (during
{2}
playback)
Play new messages
{4}
Play all messages
{5}
Stop recording
{9}
Stop playback
Turn answering
{0}
system off
Erase message
{*}{4}
currently playing
Erase all messages
{*}{5}
Record a greeting
{#}{1}{7}
message for IP line
only.
Record a greeting
{#}{2}{7}
message for landline
only.
Record a common
{#}{0}{7}
greeting message for
both IP line and
landline.
Turn answering
{#}{1}{8}
system on for IP line
only.
Turn answering
{#}{2}{8}
system on for landline
only.
Turn answering
{#}{0}{8}
system on for both IP
line and landline.
End remote operation
{*}{#}
(or hang up).
*1
*2
For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
*1 If pressed within the first 5
seconds of a message, the
previous message is played.
*2 To resume operation, enter a
remote command within 15
seconds, or the voice guidance
starts.
Turning on the answering
system remotely
If the answering system is off, you can
turn it on remotely by calling the selected
line in "Turning the answering system on
f", page 60.
1
Dial the phone number from a touch
tone phone.
2
Let the phone ring 20 times.
L A long beep will be heard.
3
Enter your remote access code
within 10 seconds after the long
beep.
L The unit answers your call with
the greeting message.
L You can hang up, or enter your
remote code again and begin
remote operation (page 64).
Skipping the greeting
message to leave a message
You can leave a message just as any
outside caller can. Call your phone
number. When the answering system
picks up, press {*} to skip the greeting
message and record your message after
the beep.
Answering System
65