Table of Contents
Advertisement
5.6
Checking System Usage (System
Reports)
5.6.1 Obtaining System Reports
System Manager's
Main Command Menu
1
2
3
4
5
6
System
Report
1
2
3
4
5
6
7
1
2
Obtain
Report
Tip:
5-12
System Manager
You can output eight types of System Reports to help moni-
tor the VPS operating status. The reports can be sent via the
RS-232C port either to a printer or a terminal. The follow-
ing eight report options are available.
The System Administrator is also able to output system re-
ports. Details of each report are described System Reports
in Chapter 7.
1
Log in the main command menu.
2
Press
5
for the System Report Menu.
3
Press
–
1
4
Press
to obtain the report.
1
To obtain the Mailbox Usage Report, go to the next step.
5
Enter the mailbox number.
To get the information about mailboxes from No. 200 to No. 209,
enter "20#". If a [#] is entered for each digit of mailbox numbers
8
(e.g., [#] [#] [#] for 3-digit mailbox numbers), then all reports will
be printed and you will return to the System Report Menu.
6
Press
to specify the mailbox range, and enter the mailbox
1
number or press
This mailbox number is the upper limit of the mailbox range. The
mailbox number entered in step 5 is the lower limit of the range.
Step 3 –
1
System Service Report
2
Disk Usage Report
3
Port Usage Report
4
Mailbox Usage Report
5
Mailbox Parameter Report
6
Call Account Report
7
Class of Service Parameter Report
8
Fax Call Report
Mailbox Parameter Report is displayed as "Mailbox
Assignments". Also, Class of Service Parameter Report is
displayed as "COS Assignments" in Chapter 7.
to obtain the desired report.
8
to obtain all mailbox usage counts.
2
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Chapters
Table of Contents
