Utility-Programmer Code; Utility-Commands; Utility-Software Version; Utility-Lan Settings - Panasonic KX-TVM50 Programming Manual

1.8.9 Utility—Programmer Code
The System Administrator can change the system password that is needed to use KX-TVM
Maintenance Console.
Follow the steps below to change the system password:
1.
Click Utility in the menu bar.
2.
Select Programmer Code.
3.
Enter a new password in Enter new password:.
4.
Enter the new password in Confirm new password:.
5.
Click OK.
1.8.10 Utility—Commands
The System Administrator can enter commands to maintain the system without closing KX-TVM
Maintenance Console.
Follow the steps below for Commands:
1.
Click Utility in the menu bar.
2.
Select Commands.
(You can click the icon in the tool bar instead of step 1 and 2.)
3.
Enter commands.
4.
Click File or Close.
(Click Log... to save the command sessions in text file as your needs.)
1.8.11 Utility—Software Version
Software Version is used to display the version of main software and DSP software for reference.
Follow the steps below to display the software version:
1.
Click Utility in the menu bar.
2.
Select Software Version.
3.
Click OK.
1.8.12 Utility—LAN Settings
The System Administrator can set the IP address and Port Number for the VPS. If you change the
Port Number, you need to restart the VPS.
Follow the steps below for LAN Settings:
1.
Click Utility in the menu bar.
2.
Select LAN Settings.
3.
Edit parameters in the LAN Settings dialogue box.
4.
Click OK.
1.8 Utility
Programming Guide 29