Port Setting - Panasonic KX-TVP100E Installation Manual And Instructions For Use

4.5.6 Hardware Settings
Value Range
Parameter
(default)
Stop Bit Length 1. 1 bit
2. 2 bits

4.5.6.2 Port Setting

The VPS must be connected to a PBX telephone line port before system start up.
System Administration Top Menu → 1 → 6 → 2
Program – Hardware – Port Setting Menu
Port Setting Menu
System Administration Top Menu → 1 → 6 → 2 → 1
Program – Hardware – Port Setting – Port 1 Menu
Value Range
Parameter
(default)
1. 100 msec
Flash Time
2. 300 msec
3. 600 msec
4. 900 msec
Note:
Specifies the number of bits used to signify the
end of the byte.
(1)
1. Port 1
2. Port 2
3. Port 3
4. Port 4
SELECT ITEM AND PRESS RETURN–KEY
Flash Time -------------------------------------------------------------- : 100
CPC Signal ------------------------------------------------------------- : 6.5
Disconnect Time ------------------------------------------------------ : 2
Dial Mode --------------------------------------------------------------- : DTMF
Specifies the length of time that the hookswitch
must be pressed before the PBX recognizes it as a
flash hook signal. See the manuals of PBX to
determine the correct value.
(100) [NOTE]
You can select only "1. 100 msec".
The "Flash" means the register recall in this manual.
Description/Function
Description/Function
System Administrator
Reference
Data
Terminal or
Printer
Connection
p.2-15
Reference
PBX Type
p.4-79
4-77