Sony Ipela PCS-XC1 Operating Instructions Manual page 86

Phone Book
Home
New Entry
Group Edit
History
Detailed Dial
The system begins dialing the selected party. "Dialing" appears on the
monitor screen. When the system connects to the system on the remote site,
the message "Session Connected." appears on the screen, and the picture
on the remote site is displayed.
Now you can start communication with the remote party.
To cancel dialing before connecting
While "Dialing" is displayed on the monitor screen, press the DISCONNECT
( ) button or the ENTER button on the Remote Commander.
To switch the display in the Phone Book between the list and the
thumbnails
Each time the F1 button on the Remote Commander is pressed, the display
changes between the list and the thumbnails.
To change the order of display
Each time the F2 button on the Remote Commander is pressed, the display
changes between the list of remote parties' names in ascending alphabetical
order and that list in descending alphabetical order.
To display the Phone Book during communication
Press the
To call a remote party registered in the Private Phone Book
1
Insert the USB storage device that contains the Private Phone Book into a
USB port on the unit.
The Phone Book changes to the Private Phone Book.
Note
Do not connect small USB devices to the USB port on the front of the unit, as they may
become impossible to remove. Connect small devices to the USB port on the rear of the
unit.
2
Select "Private Phone Book" in the Home menu, and press the ENTER
button.
3
Use the V, v, B or b button on the Remote Commander to select a remote
party you want to call from the Private Phone Book.
86
Starting a Connection by Calling a Remote Party
Default Group
Room 101
IP 123.123.123.123
Cancel
Connect
Edit
Copy
Delete
button on the Remote Commander during communication.