On-Screen Messages - Sony Ipela PCS-XC1 Operating Instructions Manual

On-Screen Messages

Check the following if a message appears on the TV monitor when operating
the unit.
Message
Cannot complete connection. (The following code and message appear.)
0 Unknown network error: Try again later.
1 Number does not exist: Check the number and try again.
2 Network congestion: Try again later.
3 Try again later.
16 Normal disconnection: (The line has been disconnected normally.)
17 Line is busy: Try again later.
18,19 System not responding: Check if the remote system is connected.
20 No such subscriber: Confirm the site number.
21 Call rejected: Check if the remote system is connected.
22 Called party number changed: Check the number and try again.
26 Connection restoration request: Try again later.
27 Remote system out of order: Check if the remote system is operational.
28 Invalid number entered: Check the number and try again.
31, 41 – 43, 47
Network not available: Try again later.
33, 34
Line is busy. Try to dial again later.
44 Network not available: Line is busy. Try again later.
50 Not a Subscriber: Check the remote party's facility contract.
57,58 Bearer capability not authorized: Check if "Restrict" is set correctly.
70 Restricted capability: Set "Restrict" to "56K" and try again.
88 Terminal attribute error: Check the connection of the remote system.
91, 95 – 102, 111
Protocol error: Turn off and restart the system and try again.
128 H.221 negotiation timeout: Restart the system and connect again.
132 Invalid SPID: Reregister the SPID.
144, 145
The remote terminal may not be compatible with the BONDING function.
177 LAN connection timeout: Try again later.
178 LAN connection rejected: Try again later.
179 DNS error.
On-Screen Messages
161