Sony Ipela PCS-XC1 Operating Instructions Manual page 40

Alpha
3
Repeat step 2 to enter all the letters or numbers.
4
After the input is complete, select "End", then press the ENTER button on
the Remote Commander.
To enter a symbol
1
Select "Symbol" on the on-screen keyboard, then press the ENTER button
on the Remote Commander.
The submenu with available symbols are displayed.
2
Use the V, v, B or b button on the Remote Commander to select the
desired symbol, then press the ENTER button.
The selected symbol is entered.
3
Repeat steps 1 and 2 to enter all the symbols.
4
After the input is complete, select "End", then press the ENTER button on
the Remote Commander.
To enter a dot (.) for an IP address
Select "b" or "Dot" on the on-screen keyboard, then press the ENTER button
on the Remote Commander.
To enter a space
Select "Space", then press the ENTER button on the Remote Commander.
To delete a character
To erase the last entered character, select "Back Space", then press the ENTER
button on the Remote Commander.
To delete all the characters entered
Select "Cancel", then press the ENTER button on the Remote Commander.
Pressing the F3 button on the Remote Commander also deletes all the
characters entered.
40
Using the Menus
1 ABC DEF
Back
Space
GHI Previous JKL MNO
A B C
PQRS TUV WXYZ Symbol
a b c
0
Space
End Cancel
Dot